MPL3E-1200 or 1600 module with 64
MB DDR-SDRAM, 64
MB flash and 2
MB SRAM.
Ethernet 10/100 Mbit PHY and connector with LEDs.
3.3V power supply (5 V input, universal power supply supplied).
5.8“ VGA display with resistive touch controller (LVDS interface to FPGA)
8 LEDs, 8 pushbutton switches
Rotary encoder button with switch
Two analog potentiometers readable via touch chip
CAN bus port
MODBUS port
Full DCE serial port
PS/2 port (keyboard and mouse)
Headphone and line in/out stereo D/A converter for sound output
Real time clock with battery backup
SD card connector
USB slave/host connector
JTAG connector
100 pin expansion connector
3V backup battery