Xilinx ML505

Manufacturer

Manuals

Personal experience

Blinking INIT LED

  • Yes, I have some but the worst one is that INIT LED is blinking and you don't know why.
  • Solution is easy. If you have this trouble send me email, I'll test where the problem is.

Description

  • XC5VLX50TFFG1136
  • DDR2 SODIMM (256 MB)
  • ZBT SRAM (1 MB)
  • Linear Flash (32 MB)
  • System ACE™ CF technology (Compact Flash) - Not every CF works with ACE correctly
  • Platform Flash - Use only one flash for storing bitstream
  • SPI Flash
  • JTAG Programming Interface - You have to use programming cable
  • External Clocking (2 Differential Pairs)
  • USB (2) – Host and Peripheral
  • PS/2 (2) – Keyboard, Mouse
  • RJ-45 – 10/100/1000 Networking
  • RS-232 (Male) – Serial port - Second serial port is on the board
  • Audio In (2) – Line, Microphone
  • Audio Out (2) – Line, Amp, SPDIF, Piezo Speaker
  • Rotary Encoder
  • Video Input
  • Video (DVI/VGA) Output
  • Single-Ended and Differential I/O Expansion
  • GPIO DIP Switch (8), LEDs (8), and Pushbuttons (5)
  • MII, GMII, RGMII, and SGMII Ethernet PHY Interfaces
  • PCI Express® Edge Connector (x1 Endpoint)
  • GTP: SFP (1000Base-X)
  • GTP: SMA (RX and TX Differential Pairs)
  • GTP: SGMII
  • GTP: PCIe™
  • GTP: SATA (Dual Host Connections)
  • GTP Clock Synthesis Chips
  • Header for 2nd Serial Port
  • 2nd Platform Flash PROM (32 Mb) for large device
  • Mictor Trace Port
  • BDM Debug Port
  • Soft Touch Port

Board pictures

Front

Impact

SW3 is set to all off

Impact

boards/ml505/ml505.txt · Last modified: 2009/07/01 16:10 (external edit)
 
Recent changes RSS feed Donate Powered by PHP Valid XHTML 1.0 Valid CSS Driven by DokuWiki