Microblaze wiki page

Main page

Projects

Mainline Linux 2.6 for Microblaze and Zynq
U-BOOT for Microblaze and Zynq
QEMU
eCos for Microblaze
Top level BSP for EDK
Ethernet performance

Description

Linux guides

Sites with limited access

2013-01-16_12_15_15

noMMU
nommu-cpio_defconfig
microblaze-unknown-uclinux-uclibc-

linux26

linux26 update log - PASS

From git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
 * branch            master     -> FETCH_HEAD
Already up-to-date.

linux26 test log - PASS

spawn ./qemu-run-nonet.sh
FDT: INTEL FLASH: baseaddr: 0xa0000000, size: 0x2000000
FDT: Unsupported peripheral invalidated ethernet@81c00000 compatibilities xlnx,xps-ll-temac-1.01.b
FDT: Unsupported peripheral invalidated i2c@81600000 compatibilities xlnx,xps-iic-2.00.a
FDT: Unsupported peripheral invalidated gpio@81400000 compatibilities xlnx,xps-gpio-1.00.a
FDT: Unsupported peripheral invalidated sysace@83600000 compatibilities xlnx,xps-sysace-1.00.a
FDT: Unsupported peripheral invalidated debug@84400000 compatibilities xlnx,mdm-1.00.d
FDT: Unsupported peripheral invalidated mpmc@90000000 compatibilities xlnx,mpmc-4.02.a
FDT: Creating QDEV model xilinx,intc  (intc)
	setting qdev prop "kind-of-intr" = 0x00000100
	connected irq : (none)
FDT: Creating QDEV model xilinx,timer  
	setting qdev prop "frequency" = 0x03b20b80
	setting qdev prop "nr-timers" = 0x00000002
	connected irq : 3 (interrupt-controller@81800000)
FDT: Creating QDEV model xilinx,uartlite  
	setting qdev prop "chr" = 0x0a2fc4e0
	connected irq : 8 (interrupt-controller@81800000)
FDT: Device tree scan complete
Early console on uartlite at 0x84000000
bootconsole [earlyser0] enabled
Ramdisk addr 0x00000000, FDT at 0x90432e7c
Linux version 3.8.0-rc3-00306-ga926f8f (monstr@monstr-desktop) (gcc version 4.1.2) #1 Wed Jan 16 12:14:01 CET 2013
setup_cpuinfo: initialising
setup_cpuinfo: Using full CPU PVR support
cache: wt_msr
setup_memory: Main mem: 0x90000000, size 0x10000000
setup_memory: kernel addr:0x90000000-0x9042f000 size=0x0042f000
setup_memory: max_mapnr: 0x10000
setup_memory: min_low_pfn: 0x90000
setup_memory: max_low_pfn: 0xa0000
setup_memory: max_pfn: 0xa0000
Zone ranges:
  DMA      [mem 0x90000000-0x9fffffff]
  Normal   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x90000000-0x9fffffff]
On node 0 totalpages: 65536
free_area_init_node: node 0, pgdat 902e1b60, node_mem_map 90431000
  DMA zone: 512 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 65024 pages, LIFO batch:0
early_printk_console remapping from 0x84000000 to 0x84000000
pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
pcpu-alloc: [0] 0 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
Kernel command line: console=ttyUL0,115200 highres=on 
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 255560k/262144k available (2860k kernel code, 6584k reserved, 93k data, 315k bss, 1011k init)
NR_IRQS:33
interrupt-controller #0 at 0x81800000, num_irq=9, edge=0x100
No chosen timer found, using default
timer #0 at 0x83c00000, irq=3
microblaze_timer_set_mode: shutdown
microblaze_timer_set_mode: periodic
ODEBUG: 2 of 2 active objects replaced
ODEBUG: selftest passed
Calibrating delay loop... 118.68 BogoMIPS (lpj=593408)
pid_max: default: 4096 minimum: 301
Mount-cache hash table entries: 512
NET: Registered protocol family 16
bio: create slab <bio-0> at 0
Switching to clocksource microblaze_clocksource
NET: Registered protocol family 2
microblaze_timer_set_mode: oneshot
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP: reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
OF: no ranges; cannot translate
OF: no ranges; cannot translate
ROMFS MTD (C) 2007 Red Hat, Inc.
msgmni has been set to 499
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
84000000.serial: ttyUL0 at MMIO 0x84000000 (irq = 8) is a uartlite
console [ttyUL0] enabled, bootconsole disabled
console [ttyUL0] enabled, bootconsole disabled
brd: module loaded
nbd: registered device at major 43
TCP: cubic registered
NET: Registered protocol family 17
Freeing unused kernel memory: 1011k freed

Bad inittab entry at line 3
Mounting proc: 
Mounting var: 
Populating /var: 
Running local start scripts.
Mounting sysfs:
Setting hostname: 
Setting up interface lo: 
Setting up interface eth0: 
ifconfig: SIOCSIFADDR: No such device
Starting syslogd:
Starting httpd: 
Mounting nfs server


uclinux login: root
Password: pass ok

/root # ifconfig
lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

/root # cat /proc/cpuinfo
CPU-Family:	MicroBlaze
FPGA-Arch:	virtex5
CPU-Ver:	7.10.d, big endian
CPU-MHz:	125.00
BogoMips:	118.68
HW:
 Shift:		yes
 MSR:		yes
 PCMP:		yes
 DIV:		yes
 MMU:		3
 MUL:		v2
 FPU:		v2
 Exc:		op0x0 unal ill zero fpu 
Stream-insns:	privileged
Icache:		no
Dcache:		no
HW-Debug:	no
PVR-USR1:	00
PVR-USR2:	00000000
Page size:	4096
/root # strace ls /
strace: applet not found
/root # 
Statistic
3.8.0-rc3-00306-ga926f8f (monstr@monstr-desktop) (gcc version 4.1.2) #1 Wed Jan 16 12:14:01 CET 2013
setup_cpuinfo: initialising
setup_cpuinfo: Using full CPU PVR support
cache: wt_msr
setup_memory: Main mem: 0x90000000, size 0x10000000
setup_memory: kernel addr:0x90000000-0x9042f000 size=0x0042f000
setup_memory: max_mapnr: 0x10000
setup_memory: min_low_pfn: 0x90000
setup_memory: max_low_pfn: 0xa0000
setup_memory: max_pfn:

linux_next

linux_next update log - PASS

Checking out files:  39% (1605/4037)   
Checking out files:  40% (1615/4037)   
Checking out files:  41% (1656/4037)   
Checking out files:  42% (1696/4037)   
Checking out files:  43% (1736/4037)   
Checking out files:  44% (1777/4037)   
Checking out files:  45% (1817/4037)   
Checking out files:  46% (1858/4037)   
Checking out files:  47% (1898/4037)   
Checking out files:  48% (1938/4037)   
Checking out files:  49% (1979/4037)   
Checking out files:  50% (2019/4037)   
Checking out files:  51% (2059/4037)   
Checking out files:  52% (2100/4037)   
Checking out files:  53% (2140/4037)   
Checking out files:  54% (2180/4037)   
Checking out files:  55% (2221/4037)   
Checking out files:  56% (2261/4037)   
Checking out files:  57% (2302/4037)   
Checking out files:  58% (2342/4037)   
Checking out files:  59% (2382/4037)   
Checking out files:  60% (2423/4037)   
Checking out files:  60% (2450/4037)   
Checking out files:  61% (2463/4037)   
Checking out files:  62% (2503/4037)   
Checking out files:  63% (2544/4037)   
Checking out files:  64% (2584/4037)   
Checking out files:  65% (2625/4037)   
Checking out files:  66% (2665/4037)   
Checking out files:  67% (2705/4037)   
Checking out files:  68% (2746/4037)   
Checking out files:  69% (2786/4037)   
Checking out files:  70% (2826/4037)   
Checking out files:  71% (2867/4037)   
Checking out files:  72% (2907/4037)   
Checking out files:  73% (2948/4037)   
Checking out files:  74% (2988/4037)   
Checking out files:  75% (3028/4037)   
Checking out files:  76% (3069/4037)   
Checking out files:  77% (3109/4037)   
Checking out files:  78% (3149/4037)   
Checking out files:  78% (3152/4037)   
Checking out files:  79% (3190/4037)   
Checking out files:  80% (3230/4037)   
Checking out files:  81% (3270/4037)   
Checking out files:  82% (3311/4037)   
Checking out files:  83% (3351/4037)   
Checking out files:  84% (3392/4037)   
Checking out files:  85% (3432/4037)   
Checking out files:  86% (3472/4037)   
Checking out files:  87% (3513/4037)   
Checking out files:  87% (3546/4037)   
Checking out files:  88% (3553/4037)   
Checking out files:  89% (3593/4037)   
Checking out files:  90% (3634/4037)   
Checking out files:  91% (3674/4037)   
Checking out files:  92% (3715/4037)   
Checking out files:  93% (3755/4037)   
Checking out files:  94% (3795/4037)   
Checking out files:  95% (3836/4037)   
Checking out files:  96% (3876/4037)   
Checking out files:  97% (3916/4037)   
Checking out files:  98% (3957/4037)   
Checking out files:  99% (3997/4037)   
Checking out files:  99% (4032/4037)   
Checking out files: 100% (4037/4037)   
Checking out files: 100% (4037/4037), done.
Switched to branch 'master'
Deleted branch next (was a21f555).
From git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
 * branch            master     -> FETCH_HEAD
Already up-to-date.
From ../linux-2.6
 * branch            HEAD       -> FETCH_HEAD
Already up-to-date.

linux_next test log - FAILED

Microblaze wiki page

Table of Contents

2013-01-16_12_15_15

linux26

linux_next