2012-09-12_12_16_31

noMMU
nommu-cpio_defconfig
microblaze-unknown-uclinux-uclibc-

linux26

From git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
 * branch            master     -> FETCH_HEAD
Already up-to-date.

linux26 test log - PASS

spawn ./qemu-run-nonet.sh
FDT: INTEL FLASH: baseaddr: 0xa0000000, size: 0x2000000
FDT: Unsupported peripheral invalidated ethernet@81c00000 compatibilities xlnx,xps-ll-temac-1.01.b
FDT: Unsupported peripheral invalidated i2c@81600000 compatibilities xlnx,xps-iic-2.00.a
FDT: Unsupported peripheral invalidated gpio@81400000 compatibilities xlnx,xps-gpio-1.00.a
FDT: Unsupported peripheral invalidated sysace@83600000 compatibilities xlnx,xps-sysace-1.00.a
FDT: Unsupported peripheral invalidated debug@84400000 compatibilities xlnx,mdm-1.00.d
FDT: Unsupported peripheral invalidated mpmc@90000000 compatibilities xlnx,mpmc-4.02.a
FDT: Creating QDEV model xilinx,intc  (intc)
	setting qdev prop "kind-of-intr" = 0x00000100
	connected irq : (none)
FDT: Creating QDEV model xilinx,timer  
	setting qdev prop "frequency" = 0x03b20b80
	setting qdev prop "nr-timers" = 0x00000002
	connected irq : 3 (interrupt-controller@81800000)
FDT: Creating QDEV model xilinx,uartlite  
	setting qdev prop "chr" = 0x08e954e0
	connected irq : 8 (interrupt-controller@81800000)
FDT: Device tree scan complete
Early console on uartlite at 0x84000000
bootconsole [earlyser0] enabled
Ramdisk addr 0x00000000, FDT at 0x9040c5c8
Linux version 3.6.0-rc5-00044-g0bd1189 (monstr@monstr-desktop) (gcc version 4.1.2) #1 Wed Sep 12 12:14:58 CEST 2012
setup_cpuinfo: initialising
setup_cpuinfo: Using full CPU PVR support
cache: wt_msr
setup_memory: Main mem: 0x90000000, size 0x10000000
setup_memory: kernel addr:0x90000000-0x90409000 size=0x00409000
setup_memory: max_mapnr: 0x10000
setup_memory: min_low_pfn: 0x90000
setup_memory: max_low_pfn: 0xa0000
setup_memory: max_pfn: 0xa0000
Zone ranges:
  DMA      [mem 0x90000000-0x9fffffff]
  Normal   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x90000000-0x9fffffff]
On node 0 totalpages: 65536
free_area_init_node: node 0, pgdat 902bb244, node_mem_map 9040b000
  DMA zone: 512 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 65024 pages, LIFO batch:0
early_printk_console remapping from 0x84000000 to 0x84000000
pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
pcpu-alloc: [0] 0 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
Kernel command line: console=ttyUL0,115200 highres=on 
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 255712k/262144k available (2732k kernel code, 6432k reserved, 67k data, 313k bss, 1012k init)
NR_IRQS:33
interrupt-controller #0 at 0x81800000, num_irq=9, edge=0x100
timer #0 at 0x83c00000, irq=3
microblaze_timer_set_mode: shutdown
microblaze_timer_set_mode: periodic
ODEBUG: 2 of 2 active objects replaced
ODEBUG: selftest passed
Calibrating delay loop... 112.02 BogoMIPS (lpj=560128)
pid_max: default: 4096 minimum: 301
Mount-cache hash table entries: 512
NET: Registered protocol family 16
bio: create slab <bio-0> at 0
Switching to clocksource microblaze_clocksource
NET: Registered protocol family 2
microblaze_timer_set_mode: oneshot
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
OF: no ranges; cannot translate
OF: no ranges; cannot translate
ROMFS MTD (C) 2007 Red Hat, Inc.
msgmni has been set to 499
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
84000000.serial: ttyUL0 at MMIO 0x84000000 (irq = 8) is a uartlite
console [ttyUL0] enabled, bootconsole disabled
console [ttyUL0] enabled, bootconsole disabled
brd: module loaded
nbd: registered device at major 43
TCP: cubic registered
NET: Registered protocol family 17
Freeing unused kernel memory: 1012k freed

Bad inittab entry at line 3
Mounting proc: 
Mounting var: 
Populating /var: 
Running local start scripts.
Mounting sysfs:
Setting hostname: 
Setting up interface lo: 
Setting up interface eth0: 
ifconfig: SIOCSIFADDR: No such device
Starting syslogd:
Starting httpd: 
Mounting nfs server


uclinux login: root
Password: pass ok

/root # ifconfig
lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

/root # cat /proc/cpuinfo
CPU-Family:	MicroBlaze
FPGA-Arch:	virtex5
CPU-Ver:	7.10.d, big endian
CPU-MHz:	125.00
BogoMips:	112.02
HW:
 Shift:		yes
 MSR:		yes
 PCMP:		yes
 DIV:		yes
 MMU:		3
 MUL:		v2
 FPU:		v2
 Exc:		op0x0 unal ill zero fpu 
Stream-insns:	privileged
Icache:		no
Dcache:		no
HW-Debug:	no
PVR-USR1:	00
PVR-USR2:	00000000
Page size:	4096
/root # strace ls /
strace: applet not found
/root # 
Statistic
3.6.0-rc5-00044-g0bd1189 (monstr@monstr-desktop) (gcc version 4.1.2) #1 Wed Sep 12 12:14:58 CEST 2012
setup_cpuinfo: initialising
setup_cpuinfo: Using full CPU PVR support
cache: wt_msr
setup_memory: Main mem: 0x90000000, size

linux_next

linux_next update log - PASS

Checking out files:   8% (737/8838)   
Checking out files:   9% (796/8838)   
Checking out files:  10% (884/8838)   
Checking out files:  11% (973/8838)   
Checking out files:  12% (1061/8838)   
Checking out files:  13% (1149/8838)   
Checking out files:  14% (1238/8838)   
Checking out files:  15% (1326/8838)   
Checking out files:  16% (1415/8838)   
Checking out files:  17% (1503/8838)   
Checking out files:  18% (1591/8838)   
Checking out files:  19% (1680/8838)   
Checking out files:  20% (1768/8838)   
Checking out files:  21% (1856/8838)   
Checking out files:  22% (1945/8838)   
Checking out files:  23% (2033/8838)   
Checking out files:  24% (2122/8838)   
Checking out files:  25% (2210/8838)   
Checking out files:  26% (2298/8838)   
Checking out files:  26% (2359/8838)   
Checking out files:  27% (2387/8838)   
Checking out files:  28% (2475/8838)   
Checking out files:  29% (2564/8838)   
Checking out files:  30% (2652/8838)   
Checking out files:  30% (2702/8838)   
Checking out files:  31% (2740/8838)   
Checking out files:  32% (2829/8838)   
Checking out files:  33% (2917/8838)   
Checking out files:  34% (3005/8838)   
Checking out files:  34% (3090/8838)   
Checking out files:  35% (3094/8838)   
Checking out files:  36% (3182/8838)   
Checking out files:  37% (3271/8838)   
Checking out files:  38% (3359/8838)   
Checking out files:  39% (3447/8838)   
Checking out files:  39% (3455/8838)   
Checking out files:  40% (3536/8838)   
Checking out files:  41% (3624/8838)   
Checking out files:  41% (3655/8838)   
Checking out files:  42% (3712/8838)   
Checking out files:  43% (3801/8838)   
Checking out files:  43% (3821/8838)   
Checking out files:  44% (3889/8838)   
Checking out files:  44% (3919/8838)   
Checking out files:  45% (3978/8838)   
Checking out files:  45% (4020/8838)   
Checking out files:  46% (4066/8838)   
Checking out files:  46% (4096/8838)   
Checking out files:  46% (4125/8838)   
Checking out files:  47% (4154/8838)   
Checking out files:  47% (4183/8838)   
Checking out files:  48% (4243/8838)   
Checking out files:  48% (4295/8838)   
Checking out files:  49% (4331/8838)   
Checking out files:  50% (4419/8838)   
Checking out files:  51% (4508/8838)   
Checking out files:  51% (4518/8838)   
Checking out files:  52% (4596/8838)   
Checking out files:  53% (4685/8838)   
Checking out files:  54% (4773/8838)   
Checking out files:  54% (4807/8838)   
Checking out files:  55% (4861/8838)   
Checking out files:  56% (4950/8838)   
Checking out files:  57% (5038/8838)   
Checking out files:  57% (5055/8838)   
Checking out files:  58% (5127/8838)   
Checking out files:  59% (5215/8838)   
Checking out files:  60% (5303/8838)   
Checking out files:  61% (5392/8838)   
Checking out files:  62% (5480/8838)   
Checking out files:  62% (5501/8838)   
Checking out files:  63% (5568/8838)   
Checking out files:  64% (5657/8838)   
Checking out files:  65% (5745/8838)   
Checking out files:  66% (5834/8838)   
Checking out files:  66% (5892/8838)   
Checking out files:  67% (5922/8838)   
Checking out files:  68% (6010/8838)   
Checking out files:  69% (6099/8838)   
Checking out files:  69% (6114/8838)   
Checking out files:  70% (6187/8838)   
Checking out files:  71% (6275/8838)   
Checking out files:  72% (6364/8838)   
Checking out files:  72% (6372/8838)   
Checking out files:  73% (6452/8838)   
Checking out files:  74% (6541/8838)   
Checking out files:  75% (6629/8838)   
Checking out files:  75% (6657/8838)   
Checking out files:  76% (6717/8838)   
Checking out files:  77% (6806/8838)   
Checking out files:  78% (6894/8838)   
Checking out files:  78% (6912/8838)   
Checking out files:  79% (6983/8838)   
Checking out files:  80% (7071/8838)   
Checking out files:  80% (7118/8838)   
Checking out files:  81% (7159/8838)   
Checking out files:  82% (7248/8838)   
Checking out files:  83% (7336/8838)   
Checking out files:  84% (7424/8838)   
Checking out files:  84% (7491/8838)   
Checking out files:  85% (7513/8838)   
Checking out files:  86% (7601/8838)   
Checking out files:  87% (7690/8838)   
Checking out files:  87% (7728/8838)   
Checking out files:  88% (7778/8838)   
Checking out files:  89% (7866/8838)   
Checking out files:  90% (7955/8838)   
Checking out files:  90% (8031/8838)   
Checking out files:  91% (8043/8838)   
Checking out files:  92% (8131/8838)   
Checking out files:  93% (8220/8838)   
Checking out files:  94% (8308/8838)   
Checking out files:  94% (8358/8838)   
Checking out files:  95% (8397/8838)   
Checking out files:  96% (8485/8838)   
Checking out files:  97% (8573/8838)   
Checking out files:  98% (8662/8838)   
Checking out files:  99% (8750/8838)   
Checking out files:  99% (8756/8838)   
Checking out files: 100% (8838/8838)   
Checking out files: 100% (8838/8838), done.
Switched to branch 'master'
Deleted branch next (was 270dede).

linux_next compile log - FAILED

scripts/kconfig/conf --silentoldconfig Kconfig
  CHK     include/linux/version.h
  UPD     include/linux/version.h
  WRAP    arch/microblaze/include/generated/asm/exec.h
  HOSTCC  scripts/dtc/checks.o
  CC      scripts/mod/empty.o
  HOSTCC  scripts/kallsyms
  HOSTCC  scripts/mod/mk_elfconfig
  HOSTCC  scripts/dtc/data.o
  HOSTCC  scripts/dtc/dtc-lexer.lex.o
  HOSTCC  scripts/bin2c
  HOSTCC  scripts/dtc/dtc-parser.tab.o
  MKELF   scripts/mod/elfconfig.h
  HOSTCC  scripts/mod/file2alias.o
  HOSTCC  scripts/mod/modpost.o
  HOSTCC  scripts/dtc/dtc.o
  HOSTCC  scripts/mod/sumversion.o
  HOSTCC  scripts/dtc/flattree.o
  HOSTCC  scripts/dtc/fstree.o
  HOSTCC  scripts/dtc/livetree.o
  HOSTCC  scripts/dtc/srcpos.o
  HOSTCC  scripts/dtc/treesource.o
  HOSTCC  scripts/dtc/util.o
  HOSTLD  scripts/dtc/dtc
  HOSTLD  scripts/mod/modpost
  CHK     include/generated/utsrelease.h
  UPD     include/generated/utsrelease.h
  CC      kernel/bounds.s
  GEN     include/generated/bounds.h
  CC      arch/microblaze/kernel/asm-offsets.s
  GEN     include/generated/asm-offsets.h
  CALL    scripts/checksyscalls.sh
  CC      init/main.o
  CC      init/do_mounts.o
  CC      init/do_mounts_rd.o
  CC      init/do_mounts_initrd.o
  CC      init/initramfs.o
  HOSTCC  usr/gen_init_cpio
  CC      arch/microblaze/kernel/dma.o
  CHK     include/generated/compile.h
  UPD     include/generated/compile.h
  CC      arch/microblaze/mm/consistent.o
  GEN     usr/initramfs_data.cpio.gz
In file included from init/do_mounts.c:15:
include/linux/tty.h:46:29: error: linux/tty_flags.h: No such file or directory
In file included from init/do_mounts.c:15:
include/linux/tty.h: In function 'tty_port_cts_enabled':
include/linux/tty.h:528: error: 'ASYNC_CTS_FLOW' undeclared (first use in this function)
include/linux/tty.h:528: error: (Each undeclared identifier is reported only once
include/linux/tty.h:528: error: for each function it appears in.)
  CC      arch/microblaze/kernel/exceptions.o
  AS      arch/microblaze/kernel/hw_exception_handler.o
  CC      arch/microblaze/mm/init.o
  AS      usr/initramfs_data.o
  CC      arch/microblaze/kernel/intc.o
  LD      usr/built-in.o
In file included from include/linux/ftrace_event.h:8,
                 from include/trace/syscall.h:6,
                 from include/linux/syscalls.h:78,
                 from init/do_mounts.h:4,
                 from init/do_mounts_rd.c:21:
include/linux/perf_event.h:649:29: error: linux/perf_regs.h: No such file or directory
In file included from include/linux/ftrace_event.h:8,
                 from include/trace/syscall.h:6,
                 from include/linux/syscalls.h:78,
                 from init/initramfs.c:19:
include/linux/perf_event.h:649:29: error: linux/perf_regs.h: No such file or directory
In file included from include/linux/ftrace_event.h:8,
                 from include/trace/syscall.h:6,
                 from include/linux/syscalls.h:78,
                 from init/main.c:16:
include/linux/perf_event.h:649:29: error: linux/perf_regs.h: No such file or directory
  CC      arch/microblaze/kernel/irq.o
  CC      arch/microblaze/kernel/process.o
make[1]: *** [init/do_mounts_initrd.o] Error 1
make[1]: *** Waiting for unfinished jobs....
  CC      arch/microblaze/kernel/prom.o
make[1]: *** [init/do_mounts_rd.o] Error 1
  CC      arch/microblaze/kernel/prom_parse.o
In file included from init/main.c:26:
include/linux/tty.h:46:29: error: linux/tty_flags.h: No such file or directory
In file included from init/main.c:26:
include/linux/tty.h: In function 'tty_port_cts_enabled':
include/linux/tty.h:528: error: 'ASYNC_CTS_FLOW' undeclared (first use in this function)
include/linux/tty.h:528: error: (Each undeclared identifier is reported only once
include/linux/tty.h:528: error: for each function it appears in.)
make[1]: *** [init/initramfs.o] Error 1
  CC      arch/microblaze/kernel/ptrace.o
  LD      arch/microblaze/mm/built-in.o
In file included from include/linux/netdevice.h:49,
                 from include/linux/icmpv6.h:173,
                 from include/linux/ipv6.h:220,
                 from include/net/ipv6.h:16,
                 from include/linux/sunrpc/clnt.h:26,
                 from include/linux/nfs_fs.h:57,
                 from init/do_mounts.c:30:
include/net/net_namespace.h:18:28: error: net/netns/sctp.h: No such file or directory
  CC      arch/microblaze/platform/platform.o
  CC      mm/filemap.o
  CC      kernel/fork.o
In file included from include/linux/netdevice.h:49,
                 from include/linux/etherdevice.h:26,
                 from arch/microblaze/kernel/prom_parse.c:7:
include/net/net_namespace.h:18:28: error: net/netns/sctp.h: No such file or directory
  CC      fs/open.o
  LD      arch/microblaze/platform/built-in.o
  CC      ipc/util.o
make[1]: *** [arch/microblaze/kernel/prom_parse.o] Error 1
make[1]: *** Waiting for unfinished jobs....
  CC      ipc/msgutil.o
/tmp/ccM6sHVq.s: Assembler messages:
/tmp/ccM6sHVq.s:181: Warning: ignoring changed section attributes for .discard
make: *** [arch/microblaze/kernel] Error 2
make: *** Waiting for unfinished jobs....
  CC      ipc/msg.o
make[1]: *** [init/main.o] Error 1
  CC      ipc/sem.o
In file included from include/linux/ftrace_event.h:8,
                 from include/trace/syscall.h:6,
                 from include/linux/syscalls.h:78,
                 from init/do_mounts.h:4,
                 from init/do_mounts.c:34:
include/linux/perf_event.h:649:29: error: linux/perf_regs.h: No such file or directory
In file included from include/linux/ftrace_event.h:8,
                 from include/trace/syscall.h:6,
                 from include/linux/syscalls.h:78,
                 from ipc/msg.c:34:
include/linux/perf_event.h:649:29: error: linux/perf_regs.h: No such file or directory
make[1]: *** [init/do_mounts.o] Error 1
make: *** [init] Error 2
  CC      ipc/shm.o
In file included from fs/open.c:13:
include/linux/tty.h:46:29: error: linux/tty_flags.h: No such file or directory
In file included from fs/open.c:13:
include/linux/tty.h: In function 'tty_port_cts_enabled':
include/linux/tty.h:528: error: 'ASYNC_CTS_FLOW' undeclared (first use in this function)
include/linux/tty.h:528: error: (Each undeclared identifier is reported only once
include/linux/tty.h:528: error: for each function it appears in.)
In file included from include/linux/ftrace_event.h:8,
                 from include/trace/syscall.h:6,
                 from include/linux/syscalls.h:78,
                 from kernel/fork.c:39:
include/linux/perf_event.h:649:29: error: linux/perf_regs.h: No such file or directory
make[1]: *** [ipc/msg.o] Error 1
make[1]: *** Waiting for unfinished jobs....
  CC      kernel/exec_domain.o
In file included from kernel/fork.c:62:
include/linux/tty.h:46:29: error: linux/tty_flags.h: No such file or directory
In file included from kernel/fork.c:62:
include/linux/tty.h: In function 'tty_port_cts_enabled':
include/linux/tty.h:528: error: 'ASYNC_CTS_FLOW' undeclared (first use in this function)
include/linux/tty.h:528: error: (Each undeclared identifier is reported only once
include/linux/tty.h:528: error: for each function it appears in.)
In file included from include/linux/ftrace_event.h:8,
                 from include/trace/syscall.h:6,
                 from include/linux/syscalls.h:78,
                 from fs/open.c:26:
include/linux/perf_event.h:649:29: error: linux/perf_regs.h: No such file or directory
make[1]: *** [fs/open.o] Error 1
make: *** [fs] Error 2
  CC      kernel/panic.o
In file included from include/linux/ftrace_event.h:8,
                 from include/trace/syscall.h:6,
                 from include/linux/syscalls.h:78,
                 from ipc/sem.c:82:
include/linux/perf_event.h:649:29: error: linux/perf_regs.h: No such file or directory
  CC      kernel/printk.o
make[1]: *** [ipc/sem.o] Error 1
  CC      kernel/cpu.o
In file included from include/linux/ftrace_event.h:8,
                 from include/trace/syscall.h:6,
                 from include/linux/syscalls.h:78,
                 from kernel/exec_domain.c:18:
include/linux/perf_event.h:649:29: error: linux/perf_regs.h: No such file or directory
make[1]: *** [kernel/exec_domain.o] Error 1
make[1]: *** Waiting for unfinished jobs....
  CC      mm/mempool.o
In file included from include/linux/init_task.h:13,
                 from kernel/fork.c:512:
include/net/net_namespace.h:18:28: error: net/netns/sctp.h: No such file or directory
In file included from include/linux/ftrace_event.h:8,
                 from include/trace/syscall.h:6,
                 from include/linux/syscalls.h:78,
                 from ipc/shm.c:33:
include/linux/perf_event.h:649:29: error: linux/perf_regs.h: No such file or directory
  CC      mm/oom_kill.o
make[1]: *** [ipc/shm.o] Error 1
make: *** [ipc] Error 2
  CC      mm/fadvise.o
make[1]: *** [kernel/fork.o] Error 1
  CC      mm/maccess.o
In file included from kernel/printk.c:21:
include/linux/tty.h:46:29: error: linux/tty_flags.h: No such file or directory
In file included from kernel/printk.c:21:
include/linux/tty.h: In function 'tty_port_cts_enabled':
include/linux/tty.h:528: error: 'ASYNC_CTS_FLOW' undeclared (first use in this function)
include/linux/tty.h:528: error: (Each undeclared identifier is reported only once
include/linux/tty.h:528: error: for each function it appears in.)
/tmp/ccFLdwlN.s: Assembler messages:
/tmp/ccFLdwlN.s:193: Warning: ignoring changed section attributes for .discard
/tmp/ccFLdwlN.s:238: Warning: ignoring changed section attributes for .discard
/tmp/ccFLdwlN.s:8901: Warning: ignoring changed section attributes for .discard
/tmp/ccFLdwlN.s:8935: Warning: ignoring changed section attributes for .discard
In file included from include/linux/ftrace_event.h:8,
                 from include/trace/syscall.h:6,
                 from include/linux/syscalls.h:78,
                 from kernel/printk.c:35:
include/linux/perf_event.h:649:29: error: linux/perf_regs.h: No such file or directory
  CC      mm/page_alloc.o
  CC      mm/page-writeback.o
  CC      mm/readahead.o
make[1]: *** [kernel/printk.o] Error 1
  CC      mm/swap.o
  CC      mm/truncate.o
make: *** [kernel] Error 2
  CC      mm/vmscan.o
In file included from include/linux/ftrace_event.h:8,
                 from include/trace/syscall.h:6,
                 from include/linux/syscalls.h:78,
                 from mm/fadvise.c:19:
include/linux/perf_event.h:649:29: error: linux/perf_regs.h: No such file or directory
make[1]: *** [mm/fadvise.o] Error 1
make[1]: *** Waiting for unfinished jobs....
In file included from include/linux/ftrace_event.h:8,
                 from include/trace/syscall.h:6,
                 from include/linux/syscalls.h:78,
                 from mm/readahead.c:20:
include/linux/perf_event.h:649:29: error: linux/perf_regs.h: No such file or directory
make[1]: *** [mm/readahead.o] Error 1
In file included from include/linux/ftrace_event.h:8,
                 from include/trace/syscall.h:6,
                 from include/linux/syscalls.h:78,
                 from mm/page-writeback.c:34:
include/linux/perf_event.h:649:29: error: linux/perf_regs.h: No such file or directory
make[1]: *** [mm/page-writeback.o] Error 1
In file included from include/linux/ftrace_event.h:8,
                 from mm/page_alloc.c:56:
include/linux/perf_event.h:649:29: error: linux/perf_regs.h: No such file or directory
make[1]: *** [mm/page_alloc.o] Error 1
make: *** [mm] Error 2

linux_next test log - PASS

cp: cannot stat `vmlinux': No such file or directory
spawn ./qemu-run-nonet.sh
FDT: INTEL FLASH: baseaddr: 0xa0000000, size: 0x2000000
FDT: Unsupported peripheral invalidated ethernet@81c00000 compatibilities xlnx,xps-ll-temac-1.01.b
FDT: Unsupported peripheral invalidated i2c@81600000 compatibilities xlnx,xps-iic-2.00.a
FDT: Unsupported peripheral invalidated gpio@81400000 compatibilities xlnx,xps-gpio-1.00.a
FDT: Unsupported peripheral invalidated sysace@83600000 compatibilities xlnx,xps-sysace-1.00.a
FDT: Unsupported peripheral invalidated debug@84400000 compatibilities xlnx,mdm-1.00.d
FDT: Unsupported peripheral invalidated mpmc@90000000 compatibilities xlnx,mpmc-4.02.a
FDT: Creating QDEV model xilinx,intc  (intc)
	setting qdev prop "kind-of-intr" = 0x00000100
	connected irq : (none)
FDT: Creating QDEV model xilinx,timer  
	setting qdev prop "frequency" = 0x03b20b80
	setting qdev prop "nr-timers" = 0x00000002
	connected irq : 3 (interrupt-controller@81800000)
FDT: Creating QDEV model xilinx,uartlite  
	setting qdev prop "chr" = 0x09eda4e0
	connected irq : 8 (interrupt-controller@81800000)
FDT: Device tree scan complete
Early console on uartlite at 0x84000000
bootconsole [earlyser0] enabled
Ramdisk addr 0x00000000, FDT at 0x9040c5c8
Linux version 3.6.0-rc5-00044-g0bd1189 (monstr@monstr-desktop) (gcc version 4.1.2) #1 Wed Sep 12 12:14:58 CEST 2012
setup_cpuinfo: initialising
setup_cpuinfo: Using full CPU PVR support
cache: wt_msr
setup_memory: Main mem: 0x90000000, size 0x10000000
setup_memory: kernel addr:0x90000000-0x90409000 size=0x00409000
setup_memory: max_mapnr: 0x10000
setup_memory: min_low_pfn: 0x90000
setup_memory: max_low_pfn: 0xa0000
setup_memory: max_pfn: 0xa0000
Zone ranges:
  DMA      [mem 0x90000000-0x9fffffff]
  Normal   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x90000000-0x9fffffff]
On node 0 totalpages: 65536
free_area_init_node: node 0, pgdat 902bb244, node_mem_map 9040b000
  DMA zone: 512 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 65024 pages, LIFO batch:0
early_printk_console remapping from 0x84000000 to 0x84000000
pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
pcpu-alloc: [0] 0 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
Kernel command line: console=ttyUL0,115200 highres=on 
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 255712k/262144k available (2732k kernel code, 6432k reserved, 67k data, 313k bss, 1012k init)
NR_IRQS:33
interrupt-controller #0 at 0x81800000, num_irq=9, edge=0x100
timer #0 at 0x83c00000, irq=3
microblaze_timer_set_mode: shutdown
microblaze_timer_set_mode: periodic
ODEBUG: 2 of 2 active objects replaced
ODEBUG: selftest passed
Calibrating delay loop... 91.34 BogoMIPS (lpj=456704)
pid_max: default: 4096 minimum: 301
Mount-cache hash table entries: 512
NET: Registered protocol family 16
bio: create slab <bio-0> at 0
Switching to clocksource microblaze_clocksource
NET: Registered protocol family 2
microblaze_timer_set_mode: oneshot
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
OF: no ranges; cannot translate
OF: no ranges; cannot translate
ROMFS MTD (C) 2007 Red Hat, Inc.
msgmni has been set to 499
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
84000000.serial: ttyUL0 at MMIO 0x84000000 (irq = 8) is a uartlite
console [ttyUL0] enabled, bootconsole disabled
console [ttyUL0] enabled, bootconsole disabled
brd: module loaded
nbd: registered device at major 43
TCP: cubic registered
NET: Registered protocol family 17
Freeing unused kernel memory: 1012k freed

Bad inittab entry at line 3
Mounting proc: 
Mounting var: 
Populating /var: 
Running local start scripts.
Mounting sysfs:
Setting hostname: 
Setting up interface lo: 
Setting up interface eth0: 
ifconfig: SIOCSIFADDR: No such device
Starting syslogd:
Starting httpd: 
Mounting nfs server


uclinux login: root
Password: pass ok

/root # ifconfig
lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

/root # cat /proc/cpuinfo
CPU-Family:	MicroBlaze
FPGA-Arch:	virtex5
CPU-Ver:	7.10.d, big endian
CPU-MHz:	125.00
BogoMips:	91.34
HW:
 Shift:		yes
 MSR:		yes
 PCMP:		yes
 DIV:		yes
 MMU:		3
 MUL:		v2
 FPU:		v2
 Exc:		op0x0 unal ill zero fpu 
Stream-insns:	privileged
Icache:		no
Dcache:		no
HW-Debug:	no
PVR-USR1:	00
PVR-USR2:	00000000
Page size:	4096
/root # strace ls /
strace: applet not found
/root # 
Statistic
3.6.0-rc5-00044-g0bd1189 (monstr@monstr-desktop) (gcc version 4.1.2) #1 Wed Sep 12 12:14:58 CEST 2012
setup_cpuinfo: initialising
setup_cpuinfo: Using full CPU PVR

Table of Contents

2012-09-12_12_16_31

linux26

linux_next