reprap

anonymous@undisclosed.example.com (Anonymous) — Tue, 01 Sep 2020 08:59:14 +0000

2026/04/05 16:57	current
Line 1:	Line 1:
	+	====== reprap ======
	+
	+	{{:reprap:soucastky_prusamendel.ods\|}}
	+
	+	http://reprap.org/wiki/Main_Page
	+
	+	https://docs.google.com/a/monstr.eu/spreadsheet/ccc?key=0AgiK-5a59F4VdFRERWNIX3phSFhMQTNFNGhuY09Vc3c#gid=3
	+
	+	skeinforge
	+	http://www.youtube.com/watch?v=tjAd1wkSbTM
	+
	+	slic3r
	+	http://www.youtube.com/watch?v=3JBaHeGO6f0
	+
	+
	+	http://calculator.josefprusa.cz/#ExtrusionSF40
	+
	+
	+	http://josefprusa.cz/blog/
	+
	+
	+
	+	http://reprapbook.com/sample-how-reprap-prints/
	+
	+	modely
	+	http://pp3dp.com/
	+
	+
	+
	+
	+	https://3dprint.fit.cvut.cz/
	+	http://daid.github.com/Cura/
	+	http://www.thingiverse.com/thing:7379
	+	http://www.youtube.com/watch?NR=1&v=rRdKj33Keec&feature=fvwp
	+
	+	http://www.youtube.com/watch?v=V7C-tNBAI4s
	+	http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge#Install
	+
	+	http://www.youtube.com/watch?v=U7Qxou48E50
	+	http://reprap.org/wiki/Sanguinololu
	+	https://github.com/ErikZalm/Marlin-non-gen6/blob/master/README
	+
	+	http://reprap.org/wiki/Sprinter
	+
	+	https://github.com/kliment/Sprinter
	+	http://josefprusa.cz/blog/
	+
	+	http://jakub.serych.cz/RepRap
	+
	+
	+	http://sanguino.cc/softwareforlinux
	+
	+
	+
	+
	+	=== OPENSCAD ===
	+	<code>
	+	Installing on Ubuntu/Kubuntu
	+
	+	There is a PPA (private package archive) for OpenSCAD that is maintained by chrysn. So installing OpenSCAD on Ubuntu/Kubuntu boils down to running the following commands:
	+	$ sudo add-apt-repository ppa:chrysn/openscad
	+	$ sudo apt-get update
	+	$ sudo apt-get install openscad
	+
	+
	+	librecad - move object to center
	+	http://www.youtube.com/watch?v=UptdZY0ZN2w
	+
	+
	+	Skeinforge
	+	http://wiki.bitsfrombytes.com/index.php?title=Skeinforge
	+	http://fabmetheus.crsndoo.com/wiki/index.php/Skeinforge#Install
	+
	+
	+
	+	[50]$ python skeinforge_application/skeinforge.py ../../mytest.stl
	+	File ../../mytest.stl is being chain exported.
	+	Carve procedure took 1 second.
	+	Preface procedure took 1 second.
	+	Inset procedure took 14 seconds.
	+	Fill procedure took 13 seconds.
	+	Speed procedure took 0 seconds.
	+	Temperature procedure took 0 seconds.
	+	Raft procedure took 1 second.
	+	Chamber procedure took 0 seconds.
	+	Jitter procedure took 1 second.
	+	Clip procedure took 2 seconds.
	+	Cool procedure took 1 second.
	+	Limit procedure took 0 seconds.
	+	Alteration procedure took 0 seconds.
	+	Skeinlayer layer count 28...
	+
	+	Statistics are being generated for the file ../../mytest_export.gcode
	+
	+	Cost
	+	Machine time cost is 0.75$.
	+	Material cost is 0.18$.
	+	Total cost is 0.93$.
	+
	+	Extent
	+	X axis extrusion starts at -29 mm and ends at 29 mm, for a width of 58 mm.
	+	Y axis extrusion starts at -26 mm and ends at 26 mm, for a depth of 52 mm.
	+	Z axis extrusion starts at 0 mm and ends at 12 mm, for a height of 11 mm.
	+
	+	Extruder
	+	Build time is 45 minutes 1 second.
	+	Distance extruded is 36145.6 mm.
	+	Distance traveled is 39915.2 mm.
	+	Extruder speed is 210.0
	+	Extruder was extruding 90.6 percent of the time.
	+	Extruder was toggled 634 times.
	+	Operating flow rate is 3.8 mm3/s.
	+	Feed rate average is 14.8 mm/s, (886.8 mm/min).
	+
	+	Filament
	+	Cross section area is 0.24 mm2.
	+	Extrusion diameter is 0.55 mm.
	+	Volume fraction is 0.82.
	+
	+	Material
	+	Mass extruded is 9.2 grams.
	+	Volume extruded is 8.5 cc.
	+
	+	Meta
	+	Text has 26618 lines and a size of 1063.0 KB.
	+	Version is 12.03.14
	+
	+	Procedures
	+	carve
	+	bottom
	+	preface
	+	inset
	+	fill
	+	speed
	+	temperature
	+	raft
	+	chamber
	+	jitter
	+	clip
	+	cool
	+	limit
	+	alteration
	+
	+	Profile
	+	ABS
	+
	+	Slice
	+	Edge width is 0.72 mm.
	+	Layer height is 0.4 mm.
	+
	+
	+	The exported file is saved as ../../mytest_export.gcode
	+	It took 38 seconds to export the file.
	+
	+
	+
	+	apt-cache show mc
	+
	+
	+
	+	arnudio sw
	+	3. replace the librxtxSerial.so with the 64Bit version by getting the libs via "apt-get install librxtx-java" and copying it from /usr/lib/librxtxSerial.so to the reprap directory (solution found here [www.arduino.cc])
	+
	+
	+
	+
	+	</code>

Microblaze Linux/Qemu/U-Boot wiki - reprap

reprap