Microblaze Linux/Qemu/U-Boot wiki - kernel:testing

Ethernet performance with Netperf

anonymous@undisclosed.example.com (Anonymous) — Tue, 01 Sep 2020 08:59:14 +0000

2026/04/19 07:31	current
Line 1:	Line 1:
	+	====== Ethernet performance with Netperf ======
	+
	+	This page provides information about ethernet performance. Script should generate dokuwiki format.
	+	Thanks for sending your results (Full script output log + information about your hardware - devel board
	+	or information about your configuration).
	+
	+	Michal Simek
	+
	+	===== Install guide=====
	+
	+	* Install netserver on your PC
	+	* run netserver
	+
	+	[root@monstr ~]# netserver
	+	Starting netserver at port 12865
	+	Starting netserver at hostname 0.0.0.0 port 12865 and family AF_UNSPEC
	+
	+	* Download test script {{:kernel:testing:netmeasure.tar.gz\|here}} (quick release)
	+	* Unpack to your petalinux-dist/romfs folder (Check file permission - 755 or 777)
	+	* Please check your kernel hacking (make linux_menuconfig) and disable all options
	+	* Build your kernel with fs (I tested this script on both kernels - MMU and noMMU)
	+
	+	* Boot linux kernel
	+	* check if is netmeasure.sh script there
	+	* Run the script: netmeasure.sh -h 192.168.0.1 -c 10
	+	* Parameters: -h host IP where netserver is, -c count
	+
	+
	+	===== ICMP test =====
	+	# ping -f 192.168.0.102 -c 1000000
	+	PING 192.168.0.102 (192.168.0.102): 56 data bytes
	+	.....................................................................
	+	--- 192.168.0.102 ping statistics ---
	+	1000069 packets transmitted, 1000000 packets received, +1 duplicates, 0% packet loss
	+	round-trip min/avg/max = 0.0/0.8/20.0 ms
	+
	+	===== Test description =====
	+
	+
	+	^Test^Test name^Units of measure^
	+	\|TCP STREAM TEST\|TCP_STREAM\|kbits/sec\|
	+	\|UDP UNIDIRECTIONAL SEND TEST\|UDP_STREAM\|kbits/sec\|
	+	\|TCP MAERTS TEST\|TCP_MAERTS\|kbits/sec\|
	+	\|TCP REQUEST/RESPONSE TEST \|TCP_RR\|Rate per sec\|
	+	\|TCP Connect/Request/Response TEST\|TCP_CRR\|Rate per sec\|
	+	\|UDP REQUEST/RESPONSE TEST \|UDP_RR\|Rate per sec\|
	+
	+	For more info please look at http://netperf.org/netperf/.
	+
	+	====== Results ======
	+
	+	==== ml505 board - latest svn PetaLogix head ====
	+	GMII standard reference design from BSB with SGDMA.
	+
	+	==noMMU-ll_temac 100MB==
	+
	+	\|TCP_STREAM\| 13793 13696 13648 13689 13693 13696 13700 13703 13846 13698 13841 13685 13832 13836 13687 13834 13731 13683 13848 13693\|Average\|13741\|
	+	\|UDP_STREAM\| 24579 24497 24542 24553 24550 24554 24551 24562 24576 24593 24581 24587 24591 24595 24591 24585 24559 24562 24572 24564\|Average\|24567\|
	+	\|TCP_MAERTS\| 12916 12915 12911 12973 12871 12951 12865 12790 12929 12883 12896 12876 12894 12885 12894 12885 12823 12863 12834 12957\|Average\|12890\|
	+	\|TCP_RR\| 256 257 256 257 256 256 257 258 256 256 255 258 256 258 256 258 256 251 256 258\|Average\|256\|
	+	\|TCP_CRR\| 94 94 93 94 93 94 94 94 93 93 94 94 93 94 94 94 93 94 93 94\|Average\|93\|
	+	\|UDP_RR\| 274 273 275 273 270 273 273 273 273 273 274 274 273 275 273 274 269 269 273 274\|Average\|272\|
	+
	+	==MMU kernel with kernel debug option==
	+
	+	\|TCP_STREAM\| 2948 2749 2647 2724 2724 2734 2692 2684 2748 2654 2766 2591 2713 2689 2829 3037 3083 2750 3002 2750\|Average\|2775\|
	+	\|UDP_STREAM\| \|Average\|failed\|
	+	\|TCP_MAERTS\| 4017 3999 3288 3442 3330 4014 3993 3257 3996 3974 4007 3136 3989 3994 4010 3133 3966 3939 3457 3940\|Average\|3744\|
	+	\|TCP_RR\| 70 72 72 72 71 72 73 73 73 72 71 72 72 73 73 73 72 73 71 72\|Average\|72\|
	+	\|TCP_CRR\| 19 19 19 19 19 19 19 19 19 20 19 19 19 19 19 19 19 19 20 20\|Average\|19\|
	+	\|UDP_RR\| 80 80 80 75 80 81 79 80 80 81 80 78 79 80 80 79 81 80 80 80\|Average\|79\|
	+
	+
	+
	+	==MMU kernel 100MB==
	+
	+	\|TCP_STREAM\| 11152 11096 11054 11091 11023 11042 11050 11041 11064 11056 11103 11077 11084 10952 11064 11027 10854 11044 11082 11088\|Average\|11052\|
	+	\|UDP_STREAM\| 40222 40431 39963 40385 40069 40308 39869 40352 39842 40414 39729 39958 40146 39751 39992 40523 39972 39982 40084 39962\|Average\|40097\|
	+	\|TCP_MAERTS\| 8882 9381 8908 8844 8735 9243 8926 9219 9313 8852 8742 9139 8813 9326 9329 8791 9095 9328 9370 9209\|Average\|9072\|
	+	\|TCP_RR\| 211 209 210 209 209 210 210 210 210 210 210 210 211 210 211 210 210 210 210 209\|Average\|209\|
	+	\|TCP_CRR\| 70 71 71 71 71 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70\|Average\|70\|
	+	\|UDP_RR\| 230 229 229 229 229 229 229 229 230 230 230 229 230 230 230 230 230 229 229 229\|Average\|229\|
	+
	+
	+
	+	==noMMU 1G-ll_temac==
	+
	+
	+	\|TCP_STREAM\| 13905 13879 13722 13787 13669 13788 13774 13775 13788 13788\|Average\|13787\|
	+	\|UDP_STREAM\| 24790 24842 24842 24815 24763 24763 24763 24763 24710 24710\|Average\|24776\|
	+	\|TCP_MAERTS\| 11996 12194 12017 12121 12006 12101 12090 12038 12100 12111\|Average\|12077\|
	+	\|TCP_RR\| 256 257 257 246 251 256 255 255 257 255\|Average\|254\|
	+	\|TCP_CRR\| 94 94 94 94 94 91 93 94 94 93\|Average\|93\|
	+	\|UDP_RR\| 271 271 272 273 272 270 271 272 272 270\|Average\|271\|
	+
	+
	+	==MMU-1G debug on==
	+
	+	\|TCP_STREAM\| 3090 3117 3110 3133 3038 3090 3113 3058 3110 3094\|Average\|3095\|
	+	\|UDP_STREAM\| \|Average\|failed\|
	+	\|TCP_MAERTS\| 3548 3910 3900 3950 4001 3898 3982 3350 3972 3681\|Average\|3819\|
	+	\|TCP_RR\| 71 72 68 72 64 63 72 72 73 74\|Average\|70\|
	+	\|TCP_CRR\| 20 20 20 19 19 19 19 19 20 19\|Average\|19\|
	+	\|UDP_RR\| 80 81 81 80 81 81 81 81 80 80\|Average\|80\|
	+
	+	==MMU-1G debug off==
	+
	+	\|TCP_STREAM\| 10791 10713 10724 10661 10608 10647 10556 10569 10530 10556\|Average\|10635\|
	+	\|UDP_STREAM\| 40364 40259 40312 40585 40154 39997 40259 40207 41202 40312\|Average\|40365\|
	+	\|TCP_MAERTS\| 8577 8891 8933 8780 8842 8832 8853 8842 8871 8584\|Average\|8800\|
	+	\|TCP_RR\| 203 203 202 202 202 201 203 201 202 202\|Average\|202\|
	+	\|TCP_CRR\| 68 68 68 68 67 68 68 68 68 68\|Average\|67\|
	+	\|UDP_RR\| 225 224 224 225 223 223 224 223 224 224\|Average\|223\|
	+
	+
	+
	+	==== Xilinx notes ====
	+	* http://www.xilinx.com/technology/embedded.htm - Click on MicroBlaze Soft Core Processor
	+
	+	<code>
	+	Network Performance
	+
	+	It's a new day and even the simplest embedded systems often require Ethernet connectivity. Xilinx FPGAs provide a variety of Ethernet IP that can be easily used with MicroBlaze with the following results.
	+	125MHz MicroBlaze / 125MHz MPMC / 125MHz PLB46 System on ML505 Board
	+	Packet Size (bytes) 10Mbit Link (Mbps) 100Mbit Link (Mbps) 1000Mbit Link (Mbps)
	+	64 7.619 76.19 761.9
	+	128 8.611 86.11 861.1
	+	512 9.624 96.24 962.4
	+	1518 9.870 98.70 987.0
	+	9000 9.978 99.78 997.8
	+	Results from XAPP 1041: Reference System: XPS LL Tri-Mode Ethernet MAC Embedded System for MicroBlaze and PowerPC Processors
	+	Maximum Configurability
	+	</code>
	+
	+
	+	====== OLD Net performance tests for emaclite driver(TX,RX - ping-pong off) on FDT kernel ======
	+
	+	++++ Kernel log \|
	+
	+	early_printk_console is enabled at 0x84000000
	+	Ramdisk addr 0x2141092c, FDT 0x20a958b0
	+	Found romfs @ 0x2141092c (0x002ec000)
	+	#### klimit 202d3000 ####
	+	Moving 0x002ec000 bytes from 0x2141092c to 0x202d2d5c
	+	New klimit: 0x205bf000
	+	Found FDT at 0x20a958b0
	+	Linux version 2.6.26-rc9-mONStR-00393-g51fe2ed-dirty (monstr@seznam.cz) (gcc version 3.4.1 ( PetaLinux 0.20 Build -rc1 050607 )) #39 Thu Jul 24 17:12:21 CEST 2008
	+	setup_cpuinfo: initialising
	+	setup_cpuinfo: Using full CPU PVR support
	+	setup_memory: max_mapnr: 0x30000
	+	setup_memory: min_low_pfn: 0x20000
	+	setup_memory: max_low_pfn: 0x10000
	+	On node 0 totalpages: 65536
	+	Normal zone: 512 pages used for memmap
	+	Normal zone: 0 pages reserved
	+	Normal zone: 65024 pages, LIFO batch:15
	+	Movable zone: 0 pages used for memmap
	+	Self modified code enable
	+	Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
	+	Kernel command line: console=ttyUL0,115200
	+	xlnx,xps-intc-1.00.a #0 at 0x81800000, num_irq=6, edge=0x0
	+	PID hash table entries: 1024 (order: 10, 4096 bytes)
	+	xlnx,xps-timer-1.00.a #0 at 0x83c00000, irq=1
	+	Heartbeat GPIO at 0x81400000
	+	Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
	+	Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
	+	Memory: 253824k/262148k available
	+	Calibrating delay loop... 61.44 BogoMIPS (lpj=307200)
	+	Mount-cache hash table entries: 512
	+	net_namespace: 192 bytes
	+	NET: Registered protocol family 16
	+	NET: Registered protocol family 2
	+	IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
	+	TCP established hash table entries: 8192 (order: 4, 65536 bytes)
	+	TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
	+	TCP: Hash tables configured (established 8192 bind 8192)
	+	TCP reno registered
	+	NET: Registered protocol family 1
	+	Initializing RT-Tester: OK
	+	msgmni has been set to 496
	+	io scheduler noop registered
	+	io scheduler anticipatory registered
	+	io scheduler deadline registered
	+	io scheduler cfq registered (default)
	+	84000000.serial: ttyUL0 at MMIO 0x84000003 (irq = 5) is a uartlite
	+	console [ttyUL0] enabled
	+	brd: module loaded
	+	nbd: registered device at major 43
	+	eth0: using fifo mode.
	+	eth0: No PHY detected. Assuming a PHY at address 0.
	+	eth0: Xilinx EMACLite #0 at 0x81000000 mapped to 0x81000000, irq=3
	+	uclinux[mtd]: RAM probe address=0x202d2d5c size=0x2ec000
	+	Creating 1 MTD partitions on "RAM":
	+	0x00000000-0x002ec000 : "ROMfs"
	+	uclinux[mtd]: set ROMfs to be root filesystem index=0
	+	TCP cubic registered
	+	NET: Registered protocol family 17
	+	RPC: Registered udp transport module.
	+	RPC: Registered tcp transport module.
	+	VFS: Mounted root (romfs filesystem) readonly.
	+	Freeing unused kernel memory: 96k freed
	+	Mounting proc:
	+	Mounting var:
	+	Populating /var:
	+	Running local start scripts.
	+	Mounting /etc/config:
	+	Populating /etc/config:
	+	flatfsd: Nonexistent or bad flatfs (-48), creating new one...
	+	flatfsd: Failed to write flatfs (-48): No such device
	+	flatfsd: Created 5 configuration files (185 bytes)
	+	Mounting sysfs:
	+	Setting hostname:
	+	Setting up interface lo:
	+	Setting up interface eth0:
	+	Starting NFS:
	+	Starting portmap:
	+	Starting thttpd:
	+
	+	uclinux login: root
	+	Password:
	+	++++
	+
	+	++++ config file \|
	+	#
	+	# Automatically generated make config: don't edit
	+	# Linux kernel version: 2.6.26-rc9
	+	#
	+	CONFIG_MICROBLAZE=y
	+	# CONFIG_MMU is not set
	+	# CONFIG_SWAP is not set
	+	CONFIG_RWSEM_GENERIC_SPINLOCK=y
	+	# CONFIG_ARCH_HAS_ILOG2_U32 is not set
	+	# CONFIG_ARCH_HAS_ILOG2_U64 is not set
	+	CONFIG_GENERIC_FIND_NEXT_BIT=y
	+	CONFIG_GENERIC_HWEIGHT=y
	+	CONFIG_GENERIC_HARDIRQS=y
	+	CONFIG_GENERIC_IRQ_PROBE=y
	+	CONFIG_GENERIC_CALIBRATE_DELAY=y
	+	CONFIG_GENERIC_TIME=y
	+	# CONFIG_PCI is not set
	+	CONFIG_NO_DMA=y
	+	CONFIG_GENERIC_CSUM=y
	+	CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
	+
	+	#
	+	# General setup
	+	#
	+	CONFIG_EXPERIMENTAL=y
	+	CONFIG_BROKEN_ON_SMP=y
	+	CONFIG_INIT_ENV_ARG_LIMIT=32
	+	CONFIG_LOCALVERSION="-mONStR"
	+	CONFIG_LOCALVERSION_AUTO=y
	+	CONFIG_SYSVIPC=y
	+	CONFIG_SYSVIPC_SYSCTL=y
	+	# CONFIG_POSIX_MQUEUE is not set
	+	# CONFIG_BSD_PROCESS_ACCT is not set
	+	# CONFIG_TASKSTATS is not set
	+	# CONFIG_AUDIT is not set
	+	CONFIG_IKCONFIG=y
	+	CONFIG_IKCONFIG_PROC=y
	+	CONFIG_LOG_BUF_SHIFT=17
	+	# CONFIG_CGROUPS is not set
	+	# CONFIG_GROUP_SCHED is not set
	+	CONFIG_SYSFS_DEPRECATED=y
	+	CONFIG_SYSFS_DEPRECATED_V2=y
	+	# CONFIG_RELAY is not set
	+	# CONFIG_NAMESPACES is not set
	+	# CONFIG_BLK_DEV_INITRD is not set
	+	CONFIG_CC_OPTIMIZE_FOR_SIZE=y
	+	CONFIG_SYSCTL=y
	+	CONFIG_EMBEDDED=y
	+	CONFIG_SYSCTL_SYSCALL=y
	+	CONFIG_SYSCTL_SYSCALL_CHECK=y
	+	CONFIG_KALLSYMS=y
	+	# CONFIG_KALLSYMS_ALL is not set
	+	CONFIG_KALLSYMS_EXTRA_PASS=y
	+	# CONFIG_HOTPLUG is not set
	+	CONFIG_PRINTK=y
	+	CONFIG_BUG=y
	+	CONFIG_ELF_CORE=y
	+	CONFIG_COMPAT_BRK=y
	+	# CONFIG_BASE_FULL is not set
	+	CONFIG_FUTEX=y
	+	CONFIG_ANON_INODES=y
	+	CONFIG_EPOLL=y
	+	CONFIG_SIGNALFD=y
	+	CONFIG_TIMERFD=y
	+	CONFIG_EVENTFD=y
	+	CONFIG_VM_EVENT_COUNTERS=y
	+	CONFIG_SLAB=y
	+	# CONFIG_SLUB is not set
	+	# CONFIG_SLOB is not set
	+	# CONFIG_PROFILING is not set
	+	# CONFIG_MARKERS is not set
	+	# CONFIG_HAVE_OPROFILE is not set
	+	# CONFIG_HAVE_KPROBES is not set
	+	# CONFIG_HAVE_KRETPROBES is not set
	+	# CONFIG_HAVE_DMA_ATTRS is not set
	+	CONFIG_SLABINFO=y
	+	CONFIG_RT_MUTEXES=y
	+	CONFIG_TINY_SHMEM=y
	+	CONFIG_BASE_SMALL=1
	+	CONFIG_MODULES=y
	+	# CONFIG_MODULE_FORCE_LOAD is not set
	+	CONFIG_MODULE_UNLOAD=y
	+	# CONFIG_MODULE_FORCE_UNLOAD is not set
	+	# CONFIG_MODVERSIONS is not set
	+	# CONFIG_MODULE_SRCVERSION_ALL is not set
	+	# CONFIG_KMOD is not set
	+	CONFIG_BLOCK=y
	+	# CONFIG_LBD is not set
	+	# CONFIG_BLK_DEV_IO_TRACE is not set
	+	# CONFIG_LSF is not set
	+	# CONFIG_BLK_DEV_BSG is not set
	+
	+	#
	+	# IO Schedulers
	+	#
	+	CONFIG_IOSCHED_NOOP=y
	+	CONFIG_IOSCHED_AS=y
	+	CONFIG_IOSCHED_DEADLINE=y
	+	CONFIG_IOSCHED_CFQ=y
	+	# CONFIG_DEFAULT_AS is not set
	+	# CONFIG_DEFAULT_DEADLINE is not set
	+	CONFIG_DEFAULT_CFQ=y
	+	# CONFIG_DEFAULT_NOOP is not set
	+	CONFIG_DEFAULT_IOSCHED="cfq"
	+	CONFIG_CLASSIC_RCU=y
	+
	+
	+	#
	+	# Platform options
	+	#
	+	CONFIG_PLATFORM_GENERIC=y
	+	CONFIG_SELFMOD=y
	+	CONFIG_SELFMOD_INTC=y
	+	CONFIG_SELFMOD_TIMER=y
	+	CONFIG_OPT_LIB_FUNCTION=y
	+	CONFIG_ALLOW_EDIT_AUTO=y
	+
	+	#
	+	# Automatic platform settings from Kconfig.auto
	+	#
	+
	+	#
	+	# Definitions for MICROBLAZE0
	+	#
	+	CONFIG_KERNEL_BASE_ADDR=0x20000000
	+	CONFIG_XILINX_MICROBLAZE0_FAMILY="virtex5"
	+	CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1
	+	CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1
	+	CONFIG_XILINX_MICROBLAZE0_USE_DIV=1
	+	CONFIG_XILINX_MICROBLAZE0_USE_HW_MULT=1
	+	CONFIG_XILINX_MICROBLAZE0_USE_FPU=0
	+	CONFIG_XILINX_MICROBLAZE0_HW_VER="7.10.c"
	+
	+	#
	+	# Processor type and features
	+	#
	+	CONFIG_PREEMPT_NONE=y
	+	# CONFIG_PREEMPT_VOLUNTARY is not set
	+	# CONFIG_PREEMPT is not set
	+	CONFIG_HZ_100=y
	+	# CONFIG_HZ_250 is not set
	+	# CONFIG_HZ_300 is not set
	+	# CONFIG_HZ_1000 is not set
	+	CONFIG_HZ=100
	+	# CONFIG_SCHED_HRTICK is not set
	+
	+	#
	+	# Boot options
	+	#
	+	# CONFIG_CMDLINE_BOOL is not set
	+	CONFIG_OF=y
	+	CONFIG_OF_DEVICE=y
	+	CONFIG_PROC_DEVICETREE=y
	+	CONFIG_SELECT_MEMORY_MODEL=y
	+	CONFIG_FLATMEM_MANUAL=y
	+	# CONFIG_DISCONTIGMEM_MANUAL is not set
	+	# CONFIG_SPARSEMEM_MANUAL is not set
	+	CONFIG_FLATMEM=y
	+	CONFIG_FLAT_NODE_MEM_MAP=y
	+	# CONFIG_SPARSEMEM_STATIC is not set
	+	# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
	+	CONFIG_PAGEFLAGS_EXTENDED=y
	+	CONFIG_SPLIT_PTLOCK_CPUS=4
	+	# CONFIG_RESOURCES_64BIT is not set
	+	CONFIG_ZONE_DMA_FLAG=0
	+	CONFIG_VIRT_TO_BUS=y
	+
	+	#
	+	# Exectuable file formats
	+	#
	+	CONFIG_BINFMT_FLAT=y
	+	# CONFIG_BINFMT_ZFLAT is not set
	+	# CONFIG_BINFMT_SHARED_FLAT is not set
	+	# CONFIG_BINFMT_MISC is not set
	+
	+	#
	+	# Networking
	+	#
	+	CONFIG_NET=y
	+
	+	#
	+	# Networking options
	+	#
	+	CONFIG_PACKET=y
	+	# CONFIG_PACKET_MMAP is not set
	+	CONFIG_UNIX=y
	+	CONFIG_XFRM=y
	+	# CONFIG_XFRM_USER is not set
	+	# CONFIG_XFRM_SUB_POLICY is not set
	+	# CONFIG_XFRM_MIGRATE is not set
	+	# CONFIG_XFRM_STATISTICS is not set
	+	# CONFIG_NET_KEY is not set
	+	CONFIG_INET=y
	+	# CONFIG_IP_MULTICAST is not set
	+	# CONFIG_IP_ADVANCED_ROUTER is not set
	+	CONFIG_IP_FIB_HASH=y
	+	# CONFIG_IP_PNP is not set
	+	# CONFIG_NET_IPIP is not set
	+	# CONFIG_NET_IPGRE is not set
	+	# CONFIG_ARPD is not set
	+	# CONFIG_SYN_COOKIES is not set
	+	# CONFIG_INET_AH is not set
	+	# CONFIG_INET_ESP is not set
	+	# CONFIG_INET_IPCOMP is not set
	+	# CONFIG_INET_XFRM_TUNNEL is not set
	+	# CONFIG_INET_TUNNEL is not set
	+	CONFIG_INET_XFRM_MODE_TRANSPORT=y
	+	CONFIG_INET_XFRM_MODE_TUNNEL=y
	+	CONFIG_INET_XFRM_MODE_BEET=y
	+	# CONFIG_INET_LRO is not set
	+	CONFIG_INET_DIAG=y
	+	CONFIG_INET_TCP_DIAG=y
	+	# CONFIG_TCP_CONG_ADVANCED is not set
	+	CONFIG_TCP_CONG_CUBIC=y
	+	CONFIG_DEFAULT_TCP_CONG="cubic"
	+	# CONFIG_TCP_MD5SIG is not set
	+	# CONFIG_IPV6 is not set
	+	# CONFIG_NETWORK_SECMARK is not set
	+	# CONFIG_NETFILTER is not set
	+	# CONFIG_IP_DCCP is not set
	+	# CONFIG_IP_SCTP is not set
	+	# CONFIG_TIPC is not set
	+	# CONFIG_ATM is not set
	+	# CONFIG_BRIDGE is not set
	+	# CONFIG_VLAN_8021Q is not set
	+	# CONFIG_DECNET is not set
	+	# CONFIG_LLC2 is not set
	+	# CONFIG_IPX is not set
	+	# CONFIG_ATALK is not set
	+	# CONFIG_X25 is not set
	+	# CONFIG_LAPB is not set
	+	# CONFIG_ECONET is not set
	+	# CONFIG_WAN_ROUTER is not set
	+	# CONFIG_NET_SCHED is not set
	+
	+	#
	+	# Network testing
	+	#
	+	# CONFIG_NET_PKTGEN is not set
	+	# CONFIG_HAMRADIO is not set
	+	# CONFIG_CAN is not set
	+	# CONFIG_IRDA is not set
	+	# CONFIG_BT is not set
	+	# CONFIG_AF_RXRPC is not set
	+
	+	#
	+	# Wireless
	+	#
	+	# CONFIG_CFG80211 is not set
	+	# CONFIG_WIRELESS_EXT is not set
	+	# CONFIG_MAC80211 is not set
	+	# CONFIG_IEEE80211 is not set
	+	# CONFIG_RFKILL is not set
	+	# CONFIG_NET_9P is not set
	+
	+	#
	+	# Device Drivers
	+	#
	+
	+	#
	+	# Generic Driver Options
	+	#
	+	CONFIG_STANDALONE=y
	+	# CONFIG_PREVENT_FIRMWARE_BUILD is not set
	+	# CONFIG_DEBUG_DRIVER is not set
	+	# CONFIG_DEBUG_DEVRES is not set
	+	# CONFIG_SYS_HYPERVISOR is not set
	+	# CONFIG_CONNECTOR is not set
	+	CONFIG_MTD=y
	+	# CONFIG_MTD_DEBUG is not set
	+	CONFIG_MTD_CONCAT=y
	+	CONFIG_MTD_PARTITIONS=y
	+	# CONFIG_MTD_REDBOOT_PARTS is not set
	+	CONFIG_MTD_CMDLINE_PARTS=y
	+	# CONFIG_MTD_AR7_PARTS is not set
	+
	+	#
	+	# User Modules And Translation Layers
	+	#
	+	CONFIG_MTD_CHAR=y
	+	CONFIG_MTD_BLKDEVS=y
	+	CONFIG_MTD_BLOCK=y
	+	# CONFIG_FTL is not set
	+	# CONFIG_NFTL is not set
	+	# CONFIG_INFTL is not set
	+	# CONFIG_RFD_FTL is not set
	+	# CONFIG_SSFDC is not set
	+	# CONFIG_MTD_OOPS is not set
	+
	+	#
	+	# RAM/ROM/Flash chip drivers
	+
	+	#
	+	CONFIG_MTD_CFI=y
	+	# CONFIG_MTD_JEDECPROBE is not set
	+	CONFIG_MTD_GEN_PROBE=y
	+	# CONFIG_MTD_CFI_ADV_OPTIONS is not set
	+	CONFIG_MTD_MAP_BANK_WIDTH_1=y
	+	CONFIG_MTD_MAP_BANK_WIDTH_2=y
	+	CONFIG_MTD_MAP_BANK_WIDTH_4=y
	+	# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
	+	# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
	+	# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
	+	CONFIG_MTD_CFI_I1=y
	+	CONFIG_MTD_CFI_I2=y
	+	# CONFIG_MTD_CFI_I4 is not set
	+	# CONFIG_MTD_CFI_I8 is not set
	+	CONFIG_MTD_CFI_INTELEXT=y
	+	CONFIG_MTD_CFI_AMDSTD=y
	+	# CONFIG_MTD_CFI_STAA is not set
	+	CONFIG_MTD_CFI_UTIL=y
	+	CONFIG_MTD_RAM=y
	+	# CONFIG_MTD_ROM is not set
	+	# CONFIG_MTD_ABSENT is not set
	+
	+	#
	+	# Mapping drivers for chip access
	+	#
	+	# CONFIG_MTD_COMPLEX_MAPPINGS is not set
	+	# CONFIG_MTD_PHYSMAP is not set
	+	CONFIG_MTD_UCLINUX=y
	+	# CONFIG_MTD_PLATRAM is not set
	+
	+	#
	+	# Self-contained MTD device drivers
	+	#
	+	# CONFIG_MTD_SLRAM is not set
	+	# CONFIG_MTD_PHRAM is not set
	+	# CONFIG_MTD_MTDRAM is not set
	+	# CONFIG_MTD_BLOCK2MTD is not set
	+
	+	#
	+	# Disk-On-Chip Device Drivers
	+	#
	+	# CONFIG_MTD_DOC2000 is not set
	+	# CONFIG_MTD_DOC2001 is not set
	+	# CONFIG_MTD_DOC2001PLUS is not set
	+	# CONFIG_MTD_NAND is not set
	+	# CONFIG_MTD_ONENAND is not set
	+
	+	#
	+	# UBI - Unsorted block images
	+	#
	+	# CONFIG_MTD_UBI is not set
	+	# CONFIG_PARPORT is not set
	+	CONFIG_BLK_DEV=y
	+	# CONFIG_BLK_DEV_COW_COMMON is not set
	+	# CONFIG_BLK_DEV_LOOP is not set
	+	CONFIG_BLK_DEV_NBD=y
	+	CONFIG_BLK_DEV_RAM=y
	+	CONFIG_BLK_DEV_RAM_COUNT=16
	+	CONFIG_BLK_DEV_RAM_SIZE=4096
	+	# CONFIG_BLK_DEV_XIP is not set
	+	# CONFIG_CDROM_PKTCDVD is not set
	+	# CONFIG_ATA_OVER_ETH is not set
	+	# CONFIG_XILINX_SYSACE is not set
	+	CONFIG_MISC_DEVICES=y
	+	# CONFIG_EEPROM_93CX6 is not set
	+	# CONFIG_ENCLOSURE_SERVICES is not set
	+	# CONFIG_HAVE_IDE is not set
	+
	+	#
	+	# SCSI device support
	+	#
	+	# CONFIG_RAID_ATTRS is not set
	+	# CONFIG_SCSI is not set
	+	# CONFIG_SCSI_DMA is not set
	+	# CONFIG_SCSI_NETLINK is not set
	+	# CONFIG_ATA is not set
	+	# CONFIG_MD is not set
	+	# CONFIG_NETDEVICES is not set
	+	# CONFIG_ISDN is not set
	+	# CONFIG_PHONE is not set
	+
	+	#
	+	# Input device support
	+	#
	+	# CONFIG_INPUT is not set
	+
	+	#
	+	# Hardware I/O ports
	+	#
	+	# CONFIG_SERIO is not set
	+	# CONFIG_GAMEPORT is not set
	+
	+	#
	+	# Character devices
	+	#
	+	# CONFIG_VT is not set
	+	CONFIG_DEVKMEM=y
	+	# CONFIG_SERIAL_NONSTANDARD is not set
	+
	+	#
	+	# Serial drivers
	+	#
	+	# CONFIG_SERIAL_8250 is not set
	+
	+	#
	+	# Non-8250 serial port support
	+	#
	+	CONFIG_SERIAL_UARTLITE=y
	+	CONFIG_SERIAL_UARTLITE_CONSOLE=y
	+	CONFIG_SERIAL_CORE=y
	+	CONFIG_SERIAL_CORE_CONSOLE=y
	+	CONFIG_UNIX98_PTYS=y
	+	CONFIG_LEGACY_PTYS=y
	+	CONFIG_LEGACY_PTY_COUNT=256
	+	# CONFIG_IPMI_HANDLER is not set
	+	CONFIG_HW_RANDOM=y
	+	# CONFIG_RTC is not set
	+	# CONFIG_GEN_RTC is not set
	+	# CONFIG_XILINX_HWICAP is not set
	+	# CONFIG_R3964 is not set
	+	# CONFIG_RAW_DRIVER is not set
	+	# CONFIG_TCG_TPM is not set
	+	# CONFIG_I2C is not set
	+	# CONFIG_SPI is not set
	+	# CONFIG_W1 is not set
	+	# CONFIG_POWER_SUPPLY is not set
	+	# CONFIG_HWMON is not set
	+	# CONFIG_THERMAL is not set
	+	# CONFIG_THERMAL_HWMON is not set
	+	# CONFIG_WATCHDOG is not set
	+
	+	#
	+	# Sonics Silicon Backplane
	+	#
	+	CONFIG_SSB_POSSIBLE=y
	+	# CONFIG_SSB is not set
	+
	+	#
	+	# Multifunction device drivers
	+	#
	+	# CONFIG_MFD_SM501 is not set
	+	# CONFIG_HTC_PASIC3 is not set
	+
	+	#
	+	# Multimedia devices
	+	#
	+
	+	#
	+	# Multimedia core support
	+	#
	+	# CONFIG_VIDEO_DEV is not set
	+	# CONFIG_DVB_CORE is not set
	+	# CONFIG_VIDEO_MEDIA is not set
	+
	+	#
	+	# Multimedia drivers
	+	#
	+	CONFIG_DAB=y
	+
	+	#
	+	# Graphics support
	+	#
	+	# CONFIG_VGASTATE is not set
	+	CONFIG_VIDEO_OUTPUT_CONTROL=y
	+	# CONFIG_FB is not set
	+	# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
	+
	+	#
	+	# Display device support
	+	#
	+	# CONFIG_DISPLAY_SUPPORT is not set
	+
	+	#
	+	# Sound
	+	#
	+	# CONFIG_SOUND is not set
	+	CONFIG_USB_SUPPORT=y
	+	# CONFIG_USB_ARCH_HAS_HCD is not set
	+	# CONFIG_USB_ARCH_HAS_OHCI is not set
	+	# CONFIG_USB_ARCH_HAS_EHCI is not set
	+
	+	# CONFIG_USB_OTG_WHITELIST is not set
	+	# CONFIG_USB_OTG_BLACKLIST_HUB is not set
	+
	+	#
	+	# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
	+	#
	+	# CONFIG_USB_GADGET is not set
	+	# CONFIG_MMC is not set
	+	# CONFIG_MEMSTICK is not set
	+	# CONFIG_NEW_LEDS is not set
	+	# CONFIG_ACCESSIBILITY is not set
	+	# CONFIG_RTC_CLASS is not set
	+	# CONFIG_UIO is not set
	+
	+	#
	+	# File systems
	+	#
	+	CONFIG_EXT2_FS=y
	+	# CONFIG_EXT2_FS_XATTR is not set
	+	# CONFIG_EXT3_FS is not set
	+	# CONFIG_EXT4DEV_FS is not set
	+	# CONFIG_REISERFS_FS is not set
	+	# CONFIG_JFS_FS is not set
	+	CONFIG_FS_POSIX_ACL=y
	+	# CONFIG_XFS_FS is not set
	+	# CONFIG_OCFS2_FS is not set
	+	# CONFIG_DNOTIFY is not set
	+	# CONFIG_INOTIFY is not set
	+	# CONFIG_QUOTA is not set
	+	# CONFIG_AUTOFS_FS is not set
	+	# CONFIG_AUTOFS4_FS is not set
	+	# CONFIG_FUSE_FS is not set
	+
	+	#
	+	# CD-ROM/DVD Filesystems
	+	#
	+	# CONFIG_ISO9660_FS is not set
	+	# CONFIG_UDF_FS is not set
	+
	+	#
	+	# DOS/FAT/NT Filesystems
	+	#
	+	# CONFIG_MSDOS_FS is not set
	+	# CONFIG_VFAT_FS is not set
	+	# CONFIG_NTFS_FS is not set
	+
	+	#
	+	# Pseudo filesystems
	+	#
	+	CONFIG_PROC_FS=y
	+	CONFIG_PROC_SYSCTL=y
	+	CONFIG_SYSFS=y
	+	# CONFIG_TMPFS is not set
	+	# CONFIG_HUGETLB_PAGE is not set
	+	# CONFIG_CONFIGFS_FS is not set
	+
	+	#
	+	# Miscellaneous filesystems
	+	#
	+	# CONFIG_ADFS_FS is not set
	+	# CONFIG_AFFS_FS is not set
	+	# CONFIG_HFS_FS is not set
	+	# CONFIG_HFSPLUS_FS is not set
	+	# CONFIG_BEFS_FS is not set
	+	# CONFIG_BFS_FS is not set
	+	# CONFIG_EFS_FS is not set
	+	# CONFIG_JFFS2_FS is not set
	+	CONFIG_CRAMFS=y
	+	# CONFIG_VXFS_FS is not set
	+	# CONFIG_MINIX_FS is not set
	+	# CONFIG_HPFS_FS is not set
	+	# CONFIG_QNX4FS_FS is not set
	+	CONFIG_ROMFS_FS=y
	+	# CONFIG_SYSV_FS is not set
	+	# CONFIG_UFS_FS is not set
	+	CONFIG_NETWORK_FILESYSTEMS=y
	+	CONFIG_NFS_FS=y
	+	CONFIG_NFS_V3=y
	+	CONFIG_NFS_V3_ACL=y
	+	CONFIG_NFS_V4=y
	+	# CONFIG_NFSD is not set
	+	CONFIG_LOCKD=y
	+	CONFIG_LOCKD_V4=y
	+	CONFIG_NFS_ACL_SUPPORT=y
	+	CONFIG_NFS_COMMON=y
	+	CONFIG_SUNRPC=y
	+	CONFIG_SUNRPC_GSS=y
	+	# CONFIG_SUNRPC_BIND34 is not set
	+	CONFIG_RPCSEC_GSS_KRB5=y
	+	# CONFIG_RPCSEC_GSS_SPKM3 is not set
	+	# CONFIG_SMB_FS is not set
	+	# CONFIG_CIFS is not set
	+	# CONFIG_NCP_FS is not set
	+	# CONFIG_CODA_FS is not set
	+	# CONFIG_AFS_FS is not set
	+
	+	#
	+	# Partition Types
	+	#
	+	# CONFIG_PARTITION_ADVANCED is not set
	+	CONFIG_MSDOS_PARTITION=y
	+	# CONFIG_NLS is not set
	+	# CONFIG_DLM is not set
	+
	+	#
	+	# Kernel hacking
	+	#
	+	# CONFIG_PRINTK_TIME is not set
	+	CONFIG_ENABLE_WARN_DEPRECATED=y
	+	CONFIG_ENABLE_MUST_CHECK=y
	+	CONFIG_FRAME_WARN=1024
	+	# CONFIG_MAGIC_SYSRQ is not set
	+	CONFIG_UNUSED_SYMBOLS=y
	+	# CONFIG_DEBUG_FS is not set
	+	# CONFIG_HEADERS_CHECK is not set
	+	CONFIG_DEBUG_KERNEL=y
	+	CONFIG_DEBUG_SHIRQ=y
	+	CONFIG_DETECT_SOFTLOCKUP=y
	+	CONFIG_SCHED_DEBUG=y
	+	CONFIG_SCHEDSTATS=y
	+	CONFIG_TIMER_STATS=y
	+	# CONFIG_DEBUG_OBJECTS is not set
	+	CONFIG_DEBUG_SLAB=y
	+	CONFIG_DEBUG_SLAB_LEAK=y
	+	# CONFIG_DEBUG_RT_MUTEXES is not set
	+	CONFIG_RT_MUTEX_TESTER=y
	+	# CONFIG_DEBUG_SPINLOCK is not set
	+	# CONFIG_DEBUG_MUTEXES is not set
	+	# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
	+	# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
	+	# CONFIG_DEBUG_KOBJECT is not set
	+	# CONFIG_DEBUG_INFO is not set
	+	CONFIG_DEBUG_VM=y
	+	# CONFIG_DEBUG_WRITECOUNT is not set
	+	# CONFIG_DEBUG_LIST is not set
	+	# CONFIG_DEBUG_SG is not set
	+	# CONFIG_BOOT_PRINTK_DELAY is not set
	+	# CONFIG_RCU_TORTURE_TEST is not set
	+	# CONFIG_BACKTRACE_SELF_TEST is not set
	+	# CONFIG_FAULT_INJECTION is not set
	+	# CONFIG_SAMPLES is not set
	+	CONFIG_EARLY_PRINTK=y
	+	CONFIG_HEART_BEAT=y
	+	# CONFIG_DEBUG_BOOTMEM is not set
	+
	+	#
	+	# Security options
	+	#
	+	# CONFIG_KEYS is not set
	+	# CONFIG_SECURITY is not set
	+	# CONFIG_SECURITY_FILE_CAPABILITIES is not set
	+	CONFIG_CRYPTO=y
	+
	+	#
	+	# Crypto core or helper
	+	#
	+	CONFIG_CRYPTO_ALGAPI=y
	+	CONFIG_CRYPTO_BLKCIPHER=y
	+	CONFIG_CRYPTO_MANAGER=y
	+	# CONFIG_CRYPTO_GF128MUL is not set
	+	# CONFIG_CRYPTO_NULL is not set
	+	# CONFIG_CRYPTO_CRYPTD is not set
	+	# CONFIG_CRYPTO_AUTHENC is not set
	+	# CONFIG_CRYPTO_TEST is not set
	+
	+	#
	+	# Authenticated Encryption with Associated Data
	+	#
	+	# CONFIG_CRYPTO_CCM is not set
	+	# CONFIG_CRYPTO_GCM is not set
	+	# CONFIG_CRYPTO_SEQIV is not set
	+
	+	#
	+	# Block modes
	+	#
	+	CONFIG_CRYPTO_CBC=y
	+	# CONFIG_CRYPTO_CTR is not set
	+	# CONFIG_CRYPTO_CTS is not set
	+	# CONFIG_CRYPTO_ECB is not set
	+	# CONFIG_CRYPTO_LRW is not set
	+	# CONFIG_CRYPTO_PCBC is not set
	+	# CONFIG_CRYPTO_XTS is not set
	+
	+	#
	+	# Hash modes
	+	#
	+	# CONFIG_CRYPTO_HMAC is not set
	+	# CONFIG_CRYPTO_XCBC is not set
	+
	+	#
	+	# Digest
	+	#
	+	# CONFIG_CRYPTO_CRC32C is not set
	+	# CONFIG_CRYPTO_MD4 is not set
	+	CONFIG_CRYPTO_MD5=y
	+	# CONFIG_CRYPTO_MICHAEL_MIC is not set
	+	# CONFIG_CRYPTO_SHA1 is not set
	+	# CONFIG_CRYPTO_SHA256 is not set
	+	# CONFIG_CRYPTO_SHA512 is not set
	+	# CONFIG_CRYPTO_TGR192 is not set
	+	# CONFIG_CRYPTO_WP512 is not set
	+
	+	#
	+	# Ciphers
	+	#
	+	# CONFIG_CRYPTO_AES is not set
	+	# CONFIG_CRYPTO_ANUBIS is not set
	+	# CONFIG_CRYPTO_ARC4 is not set
	+	# CONFIG_CRYPTO_BLOWFISH is not set
	+	# CONFIG_CRYPTO_CAMELLIA is not set
	+	# CONFIG_CRYPTO_CAST5 is not set
	+	# CONFIG_CRYPTO_CAST6 is not set
	+	CONFIG_CRYPTO_DES=y
	+	# CONFIG_CRYPTO_FCRYPT is not set
	+	# CONFIG_CRYPTO_KHAZAD is not set
	+	# CONFIG_CRYPTO_SALSA20 is not set
	+	# CONFIG_CRYPTO_SEED is not set
	+	# CONFIG_CRYPTO_SERPENT is not set
	+	# CONFIG_CRYPTO_TEA is not set
	+	# CONFIG_CRYPTO_TWOFISH is not set
	+
	+	#
	+	# Compression
	+	#
	+	# CONFIG_CRYPTO_DEFLATE is not set
	+	# CONFIG_CRYPTO_LZO is not set
	+	CONFIG_CRYPTO_HW=y
	+
	+	#
	+	# Library routines
	+	#
	+	# CONFIG_GENERIC_FIND_FIRST_BIT is not set
	+	# CONFIG_CRC_CCITT is not set
	+	# CONFIG_CRC16 is not set
	+	# CONFIG_CRC_ITU_T is not set
	+	# CONFIG_CRC32 is not set
	+	# CONFIG_CRC7 is not set
	+	# CONFIG_LIBCRC32C is not set
	+	CONFIG_ZLIB_INFLATE=y
	+	CONFIG_PLIST=y
	+	CONFIG_HAS_IOMEM=y
	+	CONFIG_HAS_IOPORT=y
	+	CONFIG_HAVE_LMB=y
	+
	+	++++
	+	++++ DTS \|
	+	/*
	+	* (C) Copyright 2007-2008 Xilinx, Inc.
	+	* (C) Copyright 2007-2008 Michal Simek
	+	*
	+	* Michal SIMEK <monstr@monstr.eu>
	+	*
	+	* This program is free software; you can redistribute it and/or
	+	* modify it under the terms of the GNU General Public License as
	+	* published by the Free Software Foundation; either version 2 of
	+	* the License, or (at your option) any later version.
	+	*
	+	* This program is distributed in the hope that it will be useful,
	+	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	+	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	+	* GNU General Public License for more details.
	+	*
	+	* You should have received a copy of the GNU General Public License
	+	* along with this program; if not, write to the Free Software
	+	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	+	* MA 02111-1307 USA
	+	*
	+	* CAUTION: This file is automatically generated by libgen.
	+	* Version: Xilinx EDK 10.1.02 EDK_K_SP2.5
	+	* Generate by FDT v1.00.a
	+	* Project: /home/projects/fdt/trunk/hardware/user-platforms/ml505-mmu-fdt
	+	*/
	+
	+	/dts-v1/;
	+
	+	/ {
	+	#address-cells = <1>;
	+	#size-cells = <1>;
	+	compatible = "xlnx,microblaze";
	+	model = "testing";
	+	DDR2_SDRAM: memory@20000000 {
	+	device_type = "memory";
	+	reg = < 0x20000000 0x10000000 >;
	+	} ;
	+	chosen {
	+	bootargs = "console=ttyUL0,115200";
	+	} ;
	+	cpus {
	+	#address-cells = <1>;
	+	#cpus = <1>;
	+	#size-cells = <0>;
	+	microblaze_0: cpu@0 {
	+	clock-frequency = <125000000>;
	+	compatible = "xlnx,microblaze-7.10.c";
	+	d-cache-baseaddr = <0x20000000>;
	+	d-cache-highaddr = <0x2fffffff>;
	+	d-cache-line-size = <0x10>;
	+	d-cache-size = <0x1000>;
	+	device_type = "cpu";
	+	i-cache-baseaddr = <0x20000000>;
	+	i-cache-highaddr = <0x2fffffff>;
	+	i-cache-line-size = <0x10>;
	+	i-cache-size = <0x800>;
	+	model = "microblaze,7.10.c";
	+	reg = <0>;
	+	timebase-frequency = <125000000>;
	+	xlnx,addr-tag-bits = <0x11>;
	+	xlnx,allow-dcache-wr = <0x1>;
	+	xlnx,allow-icache-wr = <0x1>;
	+	xlnx,area-optimized = <0x0>;
	+	xlnx,cache-byte-size = <0x800>;
	+	xlnx,d-lmb = <0x1>;
	+	xlnx,d-opb = <0x0>;
	+	xlnx,d-plb = <0x1>;
	+
	+	xlnx,data-size = <0x20>;
	+	xlnx,dcache-addr-tag = <0x10>;
	+	xlnx,dcache-always-used = <0x0>;
	+	xlnx,dcache-byte-size = <0x1000>;
	+	xlnx,dcache-line-len = <0x4>;
	+	xlnx,dcache-use-fsl = <0x1>;
	+	xlnx,debug-enabled = <0x1>;
	+	xlnx,div-zero-exception = <0x1>;
	+	xlnx,dopb-bus-exception = <0x0>;
	+	xlnx,dynamic-bus-sizing = <0x1>;
	+	xlnx,edge-is-positive = <0x1>;
	+	xlnx,family = "virtex5";
	+	xlnx,fpu-exception = <0x0>;
	+	xlnx,fsl-data-size = <0x20>;
	+	xlnx,fsl-exception = <0x0>;
	+	xlnx,fsl-links = <0x0>;
	+	xlnx,i-lmb = <0x1>;
	+	xlnx,i-opb = <0x0>;
	+	xlnx,i-plb = <0x1>;
	+	xlnx,icache-always-used = <0x0>;
	+	xlnx,icache-line-len = <0x4>;
	+	xlnx,icache-use-fsl = <0x1>;
	+	xlnx,ill-opcode-exception = <0x1>;
	+	xlnx,instance = "microblaze_0";
	+	xlnx,interconnect = <0x1>;
	+	xlnx,interrupt-is-edge = <0x0>;
	+	xlnx,iopb-bus-exception = <0x0>;
	+	xlnx,mmu-dtlb-size = <0x4>;
	+	xlnx,mmu-itlb-size = <0x2>;
	+	xlnx,mmu-tlb-access = <0x3>;
	+	xlnx,mmu-zones = <0x10>;
	+	xlnx,number-of-pc-brk = <0x4>;
	+	xlnx,number-of-rd-addr-brk = <0x2>;
	+	xlnx,number-of-wr-addr-brk = <0x2>;
	+	xlnx,opcode-0x0-illegal = <0x0>;
	+	xlnx,pvr = <0x2>;
	+	xlnx,pvr-user1 = <0x12>;
	+	xlnx,pvr-user2 = <0x12345678>;
	+	xlnx,reset-msr = <0x0>;
	+	xlnx,sco = <0x0>;
	+	xlnx,unaligned-exceptions = <0x1>;
	+	xlnx,use-barrel = <0x1>;
	+	xlnx,use-dcache = <0x1>;
	+	xlnx,use-div = <0x1>;
	+	xlnx,use-ext-brk = <0x1>;
	+	xlnx,use-ext-nm-brk = <0x1>;
	+	xlnx,use-extended-fsl-instr = <0x0>;
	+	xlnx,use-fpu = <0x0>;
	+	xlnx,use-hw-mul = <0x1>;
	+	xlnx,use-icache = <0x1>;
	+	xlnx,use-interrupt = <0x1>;
	+	xlnx,use-mmu = <0x3>;
	+	xlnx,use-msr-instr = <0x1>;
	+	xlnx,use-pcmp-instr = <0x1>;
	+	} ;
	+	} ;
	+	mb_plb: plb@0 {
	+	#address-cells = <1>;
	+	#size-cells = <1>;
	+	compatible = "xlnx,plb-v46-1.03.a", "simple-bus";
	+	ranges ;
	+	Ethernet_MAC: ethernet@81000000 {
	+	compatible = "xlnx,xps-ethernetlite-2.00.a";
	+	device_type = "network";
	+	interrupt-parent = <&xps_intc_0>;
	+	interrupts = < 3 0x0 >;
	+	local-mac-address = [ 02 00 00 00 00 00 ];
	+	reg = < 0x81000000 0x10000 >;
	+	xlnx,duplex = <0x1>;
	+	xlnx,family = "virtex5";
	+	xlnx,rx-ping-pong = <0x0>;
	+	xlnx,tx-ping-pong = <0x0>;
	+	} ;
	+	LEDs_8Bit: gpio@81400000 {
	+	compatible = "xlnx,xps-gpio-1.00.a";
	+	interrupt-parent = <&xps_intc_0>;
	+	interrupts = < 4 0x2 >;
	+	reg = < 0x81400000 0x10000 >;
	+	xlnx,all-inputs = <0x0>;
	+	xlnx,all-inputs-2 = <0x0>;
	+	xlnx,dout-default = <0x0>;
	+	xlnx,dout-default-2 = <0x0>;
	+	xlnx,family = "virtex5";
	+	xlnx,gpio-width = <0x8>;
	+	xlnx,interrupt-present = <0x1>;
	+	xlnx,is-bidir = <0x1>;
	+	xlnx,is-bidir-2 = <0x1>;
	+	xlnx,is-dual = <0x0>;
	+	xlnx,tri-default = <0xffffffff>;
	+	xlnx,tri-default-2 = <0xffffffff>;
	+	} ;
	+	RS232_Uart_1: serial@84000000 {
	+	clock-frequency = <125000000>;
	+	compatible = "xlnx,xps-uartlite-1.00.a";
	+	device_type = "serial";
	+	interrupt-parent = <&xps_intc_0>;
	+	interrupts = < 5 0x0 >;
	+	port-number = <0>;
	+	reg = < 0x84000000 0x10000 >;
	+	xlnx,baudrate = <0x1c200>;
	+	xlnx,data-bits = <0x8>;
	+	xlnx,family = "virtex5";
	+	xlnx,odd-parity = <0x0>;
	+	xlnx,use-parity = <0x0>;
	+	} ;
	+	SysACE_CompactFlash: sysace@83600000 {
	+	compatible = "xlnx,xps-sysace-1.00.a";
	+	interrupt-parent = <&xps_intc_0>;
	+	interrupts = < 2 0x2 >;
	+	reg = < 0x83600000 0x10000 >;
	+	xlnx,family = "virtex5";
	+	xlnx,mem-width = <0x10>;
	+	} ;
	+	debug_module: debug@84400000 {
	+	compatible = "xlnx,mdm-1.00.c";
	+	reg = < 0x84400000 0x10000 >;
	+	xlnx,family = "virtex5";
	+	xlnx,interconnect = <0x1>;
	+	xlnx,jtag-chain = <0x2>;
	+	xlnx,mb-dbg-ports = <0x1>;
	+	xlnx,uart-width = <0x8>;
	+	xlnx,use-uart = <0x1>;
	+	xlnx,write-fsl-ports = <0x0>;
	+	} ;
	+	mpmc@20000000 {
	+	#address-cells = <1>;
	+	#size-cells = <1>;
	+	compatible = "xlnx,mpmc-4.02.a";
	+	} ;
	+	xps_intc_0: interrupt-controller@81800000 {
	+	#interrupt-cells = <2>;
	+	compatible = "xlnx,xps-intc-1.00.a";
	+	interrupt-controller ;
	+	reg = < 0x81800000 0x10000 >;
	+	xlnx,num-intr-inputs = <0x6>;
	+	} ;
	+	xps_timer_1: timer@83c00000 {
	+	compatible = "xlnx,xps-timer-1.00.a";
	+	interrupt-parent = <&xps_intc_0>;
	+	interrupts = < 1 0x2 >;
	+	reg = < 0x83c00000 0x10000 >;
	+	xlnx,count-width = <0x20>;
	+	xlnx,family = "virtex5";
	+	xlnx,gen0-assert = <0x1>;
	+	xlnx,gen1-assert = <0x1>;
	+	xlnx,one-timer-only = <0x0>;
	+	xlnx,trig0-assert = <0x1>;
	+	xlnx,trig1-assert = <0x1>;
	+	} ;
	+	} ;
	+	} ;
	+
	+	++++
	+
	+
	+	====== Tests ======
	+
	+	netperf -H 192.168.1.102 -t TCP_STREAM
	+	netperf -H 192.168.1.102 -t TCP_MAERTS
	+	netperf -H 192.168.1.102 -t TCP_RR
	+	netperf -H 192.168.1.102 -t TCP_CRR
	+	netperf -H 192.168.1.102 -t UDP_STREAM
	+	netperf -H 192.168.1.102 -t UDP_RR
	+
	+
	+	l - len in sec
	+	i - iteration
	+
	+	Microblaze: nc -l -u -p 4794
	+	x86: echo "hello" \| nc -l 192.168.1.120 1234
	+
	+
	+
	+	# /etc/init.d/network
	+	Setting up interface lo:
	+	Setting up interface eth0:
	+	Starting NFS:
	+	Starting portmap:
	+	# netstat
	+	Active Internet connections (w/o servers)
	+	Proto Recv-Q Send-Q Local Address Foreign Address State
	+	tcp 0 0 192.168.1.120:752 192.168.1.102:sunrpc TIME_WAIT
	+	tcp 0 0 192.168.1.120:709 192.168.1.102:nfs ESTABLISHED
	+	tcp 0 0 192.168.1.120:753 192.168.1.102:956 TIME_WAIT
	+	Active UNIX domain sockets (w/o servers)
	+	Proto RefCnt Flags Type State I-Node Path
	+	#
	+
	+
	+
	+	===== Results =====
	+
	+
	+	^LIB^SELFMOD^TCP STREAM^TCP MAERTS^TCP RR^TCP CRR^UDP STREAM^UDP RR^
	+	\|ON\|ON\|5.96, 6.10, 6.04, 5.97\|5.72, 5.71, 5.70, 5.70\|360.84, 347.35, 380.42, 338.76\|4.60, 4,60, 0.40, 1.3 \|10.03, 10.01, 10.01, 10.01\|529.07, -, 111.99, -\|
	+	\|ON-ASM\|ON\|5.98, 5.82, 5.99, 5.99\|5,72, 5.64, 5.64, 5.73\|359,90, 340.56, 390.41, 337.36\|4.60, 4.60, 4.60, 4.50\|10.01, 10.01, 10.00, 10.02\|274.13, 72.73, 62.84, -\|
	+	\|OFF\|ON\|4.48\|4.47\|294.41\|4.50\|7.22, 7.22\|86.31\|
	+	\|OFF\|OFF\|4.45\|4.55\|293.51\|4.50\|7.25, 7.25\|19.18\|
	+	\|ON\|OFF\|5.94, 5.96, 5.97, 5.96\|5.72, 5.58, 5.71, 4.32\|395.10, 394.21, 404,30, 44.06 \|4.50, 4.50, 4.60, 0.10\|10.02, 10.03, 10.02, -\|10.19, 87.71, -, -\|
	+	\|tested\|\|12.88\|9.36\|513.89\|4.70\|0.16 - only 3\| - \| I turn off some DEBUG function for kernel hacking and checking
	+
	+
	+
	+	===== Library-ON, Selfmod-ON =====
	+
	+	# ./netperf
	+	TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.1.102 (192.168.1.102) port 0 AF_INET
	+	Recv Send Send
	+	Socket Socket Message Elapsed
	+	Size Size Size Time Throughput
	+	bytes bytes bytes secs. 10^6bits/sec
	+
	+	87380 16384 16384 10.02 5.96
	+	TCP MAERTS TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.1.102 (192.168.1.102) port 0 AF_INET
	+	Recv Send Send
	+	Socket Socket Message Elapsed
	+	Size Size Size Time Throughput
	+	bytes bytes bytes secs. 10^6bits/sec
	+
	+	87380 16384 16384 10.01 5.72
	+	TCP REQUEST/RESPONSE TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.1.102 (192.168.1.102) port 0 AF_INET
	+	Local /Remote
	+	Socket Size Request Resp. Elapsed Trans.
	+	Send Recv Size Size Time Rate
	+	bytes Bytes bytes bytes secs. per sec
	+
	+	16384 87380 1 1 10.01 360.84
	+	16384 87380
	+	TCP Connect/Request/Response TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.1.102 (192.168.1.102) port 0 AF_INET
	+	Local /Remote
	+	Socket Size Request Resp. Elapsed Trans.
	+	Send Recv Size Size Time Rate
	+	bytes Bytes bytes bytes secs. per sec
	+
	+	16384 87380 1 1 10.01 4.60
	+	16384 87380
	+	UDP UNIDIRECTIONAL SEND TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.1.102 (192.168.1.102) port 0 AF_INET
	+	Socket Message Elapsed Messages
	+	Size Size Time Okay Errors Throughput
	+	bytes bytes secs # # 10^6bits/sec
	+
	+	104448 65507 10.03 192 0 10.03
	+	109568 10.03 192 10.03
	+
	+	UDP REQUEST/RESPONSE TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.1.102 (192.168.1.102) port 0 AF_INET
	+	Local /Remote
	+	Socket Size Request Resp. Elapsed Trans.
	+	Send Recv Size Size Time Rate
	+	bytes Bytes bytes bytes secs. per sec
	+
	+	104448 104448 1 1 10.01 529.07
	+	109568 109568
	+
	+
	+	===== Library-OFF, Selfmod-ON =====
	+
	+	# ./netperf
	+	TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.1.102 (192.168.1.102) port 0 AF_INET
	+	Recv Send Send
	+	Socket Socket Message Elapsed
	+	Size Size Size Time Throughput
	+	bytes bytes bytes secs. 10^6bits/sec
	+
	+	87380 16384 16384 10.03 4.48
	+	TCP MAERTS TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.1.102 (192.168.1.102) port 0 AF_INET
	+	Recv Send Send
	+	Socket Socket Message Elapsed
	+	Size Size Size Time Throughput
	+	bytes bytes bytes secs. 10^6bits/sec
	+
	+	87380 16384 16384 10.20 4.47
	+	TCP REQUEST/RESPONSE TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.1.102 (192.168.1.102) port 0 AF_INET
	+	Local /Remote
	+	Socket Size Request Resp. Elapsed Trans.
	+	Send Recv Size Size Time Rate
	+	bytes Bytes bytes bytes secs. per sec
	+
	+	16384 87380 1 1 10.01 294.41
	+	16384 87380
	+	TCP Connect/Request/Response TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.1.102 (192.168.1.102) port 0 AF_INET
	+	Local /Remote
	+	Socket Size Request Resp. Elapsed Trans.
	+	Send Recv Size Size Time Rate
	+	bytes Bytes bytes bytes secs. per sec
	+
	+	16384 87380 1 1 10.01 4.50
	+	16384 87380
	+	UDP UNIDIRECTIONAL SEND TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.1.102 (192.168.1.102) port 0 AF_INET
	+	Socket Message Elapsed Messages
	+	Size Size Time Okay Errors Throughput
	+	bytes bytes secs # # 10^6bits/sec
	+
	+	104448 65507 10.01 138 0 7.22
	+	109568 10.01 138 7.22
	+
	+	UDP REQUEST/RESPONSE TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.1.102 (192.168.1.102) port 0 AF_INET
	+	Local /Remote
	+	Socket Size Request Resp. Elapsed Trans.
	+	Send Recv Size Size Time Rate
	+	bytes Bytes bytes bytes secs. per sec
	+
	+	104448 104448 1 1 10.01 86.31
	+	109568 109568
	+
	+
	+	===== Library-OFF, Selfmod-OFF =====
	+
	+	# ./netperf
	+	TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.1.102 (192.168.1.102) port 0 AF_INET
	+	Recv Send Send
	+	Socket Socket Message Elapsed
	+	Size Size Size Time Throughput
	+	bytes bytes bytes secs. 10^6bits/sec
	+
	+	87380 16384 16384 10.01 4.45
	+	TCP MAERTS TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.1.102 (192.168.1.102) port 0 AF_INET
	+	Recv Send Send
	+	Socket Socket Message Elapsed
	+	Size Size Size Time Throughput
	+	bytes bytes bytes secs. 10^6bits/sec
	+
	+	87380 16384 16384 10.00 4.55
	+	TCP REQUEST/RESPONSE TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.1.102 (192.168.1.102) port 0 AF_INET
	+	Local /Remote
	+	Socket Size Request Resp. Elapsed Trans.
	+	Send Recv Size Size Time Rate
	+	bytes Bytes bytes bytes secs. per sec
	+
	+	16384 87380 1 1 10.01 293.51
	+	16384 87380
	+	TCP Connect/Request/Response TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.1.102 (192.168.1.102) port 0 AF_INET
	+	Local /Remote
	+	Socket Size Request Resp. Elapsed Trans.
	+	Send Recv Size Size Time Rate
	+	bytes Bytes bytes bytes secs. per sec
	+
	+	16384 87380 1 1 10.01 4.50
	+	16384 87380
	+	UDP UNIDIRECTIONAL SEND TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.1.102 (192.168.1.102) port 0 AF_INET
	+	Socket Message Elapsed Messages
	+	Size Size Time Okay Errors Throughput
	+	bytes bytes secs # # 10^6bits/sec
	+
	+	104448 65507 10.05 139 0 7.25
	+	109568 10.05 139 7.25
	+
	+	UDP REQUEST/RESPONSE TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.1.102 (192.168.1.102) port 0 AF_INET
	+	Local /Remote
	+	Socket Size Request Resp. Elapsed Trans.
	+	Send Recv Size Size Time Rate
	+	bytes Bytes bytes bytes secs. per sec
	+
	+	104448 104448 1 1 10.01 19.18
	+	109568 109568
	+
	+
	+	===== Library-ON, Selfmod-OFF =====
	+
	+	# ./netperf
	+	TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.1.102 (192.168.1.102) port 0 AF_INET
	+	Recv Send Send
	+	Socket Socket Message Elapsed
	+	Size Size Size Time Throughput
	+	bytes bytes bytes secs. 10^6bits/sec
	+
	+	87380 16384 16384 10.02 5.94
	+	TCP MAERTS TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.1.102 (192.168.1.102) port 0 AF_INET
	+	Recv Send Send
	+	Socket Socket Message Elapsed
	+	Size Size Size Time Throughput
	+	bytes bytes bytes secs. 10^6bits/sec
	+
	+	87380 16384 16384 10.01 5.72
	+	TCP REQUEST/RESPONSE TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.1.102 (192.168.1.102) port 0 AF_INET
	+	Local /Remote
	+	Socket Size Request Resp. Elapsed Trans.
	+	Send Recv Size Size Time Rate
	+	bytes Bytes bytes bytes secs. per sec
	+
	+	16384 87380 1 1 10.00 395.10
	+	16384 87380
	+	TCP Connect/Request/Response TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.1.102 (192.168.1.102) port 0 AF_INET
	+	Local /Remote
	+	Socket Size Request Resp. Elapsed Trans.
	+	Send Recv Size Size Time Rate
	+	bytes Bytes bytes bytes secs. per sec
	+
	+	16384 87380 1 1 10.01 4.50
	+	16384 87380
	+	UDP UNIDIRECTIONAL SEND TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.1.102 (192.168.1.102) port 0 AF_INET
	+	Socket Message Elapsed Messages
	+	Size Size Time Okay Errors Throughput
	+	bytes bytes secs # # 10^6bits/sec
	+
	+	104448 65507 10.04 192 0 10.02
	+	109568 10.04 192 10.02
	+
	+	UDP REQUEST/RESPONSE TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.1.102 (192.168.1.102) port 0 AF_INET
	+	Local /Remote
	+	Socket Size Request Resp. Elapsed Trans.
	+	Send Recv Size Size Time Rate
	+	bytes Bytes bytes bytes secs. per sec
	+
	+	104448 104448 1 1 10.01 10.19
	+	109568 109568
	+
	+

Xilinx-ML505-MMU-full-11.3 - 100Mb/s, LL_Temac

anonymous@undisclosed.example.com (Anonymous) — Tue, 01 Sep 2020 08:59:14 +0000

2026/04/19 07:31	current
Line 1:	Line 1:
	+	====== Xilinx-ML505-MMU-full-11.3 - 100Mb/s, LL_Temac ======
	+	* reference design: Xilinx-ML505-MMU-full-11.3
	+	* kernel: MMU
	+	* cache: icache=16kB; dcache=16kB, write back
	+	* 100Mb/s - cross cable, full duplex
	+	* defconfig: networktest1_defconfig
	+	* date: Thu Oct 22 11:54:10 CEST 2009
	+	* version: Linux version 2.6.30-00068-g6177bf8-dirty (monstr@monstr.eu) (gcc version 4.1.2) #74 Thu Oct 22 09:54:26 CEST 2009
	+
	+
	+	===== Test result =====
	+	^Test^10 test result^Average^Unit^
	+	\|TCP_STREAM\| 14780 14686 14771 14709 14750 14721 14606 14642 14703 14731\|14709\|kbits/sec\|
	+	\|UDP_STREAM\| 24814 24849 24908 24786 24794 24883 24912 24876 24789 24774\|24838\|kbits/sec\|
	+	\|TCP_MAERTS\| 7268 7091 7376 7414 6953 7049 7123 7121 6840 6914\|7114\|kbits/sec\|
	+	\|TCP_RR\| 281 290 283 290 291 284 290 284 295 289\|287\|Rate per sec\|
	+	\|TCP_CRR\| 74 105 74 103 97 103 74 71 105 105\|91\|Rate per sec\|
	+	\|UDP_RR\| 14 112 309 100 309 309 308 308 147 309\|222\|Rate per sec\|
	+
	+
	+	===== Kernel information =====
	+	<code>
	+	commit 18240904960a39e582ced8ba8ececb10b8c22dd3
	+	Merge: f86054c 8a47890
	+	Author: Linus Torvalds <torvalds@linux-foundation.org>
	+	Date: Mon Sep 14 20:07:31 2009 -0700
	+
	+	Merge branch 'for-linus3' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6
	+
	+	* 'for-linus3' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
	+	SELinux: inline selinux_is_enabled in !CONFIG_SECURITY_SELINUX
	+	KEYS: Fix garbage collector
	+	KEYS: Unlock tasklist when exiting early from keyctl_session_to_parent
	+	CRED: Allow put_cred() to cope with a NULL groups list
	+	SELinux: flush the avc before disabling SELinux
	+	SELinux: seperate avc_cache flushing
	+	Creds: creds->security can be NULL is selinux is disabled
	+	</code>
	+
	+
	+	===== Kernel log =====
	+
	+
	+	<code>
	+	=================================================
	+	FS-BOOT First Stage Bootloader (c) 2006 PetaLogix
	+	Project name: Xilinx-ML505-MMU-full-11.3
	+	Build date: Oct 1 2009 10:13:56 FS
	+	Serial console: Uart16550
	+	=================================================
	+	FS-BOOT: System initialisation completed.
	+	FS-BOOT: No existing image in FLASH. Starting image download.
	+	FS-BOOT: Waiting for SREC image....
	+	SDRAM :
	+	Icache:OK
	+	Dcache:OK
	+	U-Boot Start:0x5ff00000
	+	FLASH: 32 MB
	+	Net: Xilinx LL TEMAC
	+	MAC: 00:e0:0c:00:00:fd
	+	Hit any key to stop autoboot: 0
	+	Xilinx LL TEMAC: Xilinx XPS LocalLink Tri-Mode Ether MAC #0 at 0x81C00000.
	+	100BASE-T/FD
	+	Using Xilinx LL TEMAC device
	+	TFTP from server 192.168.0.101; our IP address is 192.168.0.3
	+	Filename 'image.ub'.
	+	Load address: 0x50200000
	+	Loading: 100BASE-T/FD
	+	#################################################################
	+	#################################################################
	+	#################################################################
	+	#################################################################
	+	#################################################################
	+	#################################################################
	+	###########################################T #######################
	+	#################################################################
	+	###########################################################
	+	done
	+	Bytes transferred = 8497220 (81a844 hex)
	+	## Booting kernel from Legacy Image at 50200000 ...
	+	Image Name: PetaLinux Kernel 2.6-MMU
	+	Image Type: MicroBlaze Linux Kernel Image (uncompressed)
	+	Data Size: 8497156 Bytes = 8.1 MB
	+	Load Address: 50000000
	+	Entry Point: 50000000
	+	Verifying Checksum ... OK
	+	Loading Kernel Image ... OK
	+	OK
	+	## Transferring control to Linux (at address 50000000), 0x50000000 ramdisk 0x00000000, FDT 0x00000000...
	+	Linux version 2.6.30-00068-g6177bf8-dirty (monstr@monstr.eu) (gcc version 4.1.2) #74 Thu Oct 22 09:54:26 CEST 2009
	+	setup_cpuinfo: initialising
	+	setup_cpuinfo: Using full CPU PVR support
	+	ERROR: Microblaze DCACHE WB-different for PVR and DTS
	+	setup_memory: max_mapnr: 0x10000
	+	setup_memory: min_low_pfn: 0x50000
	+	setup_memory: max_low_pfn: 0x60000
	+	On node 0 totalpages: 65536
	+	free_area_init_node: node 0, pgdat c022eb94, node_mem_map c082e000
	+	Normal zone: 512 pages used for memmap
	+	Normal zone: 0 pages reserved
	+	Normal zone: 65024 pages, LIFO batch:15
	+	Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
	+	Kernel command line: console=ttyS0,115200
	+	NR_IRQS:32
	+	xlnx,xps-intc-1.00.a #0 at 0xfdfff000, num_irq=7, edge=0xffffff80
	+	PID hash table entries: 1024 (order: 10, 4096 bytes)
	+	xlnx,xps-timer-1.00.a #0 at 0xfdffe000, irq=3
	+	microblaze_timer_set_mode: shutdown
	+	microblaze_timer_set_mode: periodic
	+	Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
	+	Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
	+	Memory: 251008k/262144k available
	+	Calibrating delay loop... 61.31 BogoMIPS (lpj=122624)
	+	Mount-cache hash table entries: 512
	+	net_namespace: 520 bytes
	+	NET: Registered protocol family 16
	+	microblaze_timer_set_mode: oneshot
	+	Switched to high resolution mode on CPU 0
	+	NET: Registered protocol family 2
	+	IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
	+	TCP established hash table entries: 8192 (order: 4, 65536 bytes)
	+	TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
	+	TCP: Hash tables configured (established 8192 bind 8192)
	+	TCP reno registered
	+	NET: Registered protocol family 1
	+	JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
	+	Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
	+	83e00000.serial: ttyS0 at MMIO 0x83e01003 (irq = 6) is a 16550A
	+	console [ttyS0] enabled
	+	Device Tree Probing 'ethernet'
	+	xilinx_lltemac 81c00000.ethernet: MAC address is now 0: a:35: 0:22: 1
	+	xilinx_lltemac 81c00000.ethernet: XLlTemac: using DMA mode.
	+	XLlTemac: Dma base address: phy: 0x84600100, virt: 0xd005c100
	+	XLlTemac: buffer descriptor size: 32768 (0x8000)
	+	XLlTemac: Allocating DMA descriptors with kmalloc<6>XLlTemac: (buffer_descriptor_init) phy: 0x5ec90000, virt: 0xcec90000, size: 0x8000
	+	XTemac: PHY detected at address 7.
	+	eth0 (): not using net_device_ops yet
	+	eth0: Dropping NETIF_F_SG since no checksum feature.
	+	xilinx_lltemac 81c00000.ethernet: eth0: Xilinx TEMAC at 0x81C00000 mapped to 0xD0056000, irq=4
	+	86000000.flash: Found 1 x16 devices at 0x0 in 16-bit bank
	+	Intel/Sharp Extended Query Table at 0x010A
	+	Intel/Sharp Extended Query Table at 0x010A
	+	Intel/Sharp Extended Query Table at 0x010A
	+	Intel/Sharp Extended Query Table at 0x010A
	+	Intel/Sharp Extended Query Table at 0x010A
	+	Using buffer write method
	+	Using auto-unlock on power-up/resume
	+	cfi_cmdset_0001: Erase suspend on write enabled
	+	erase region 0: offset=0x0,size=0x20000,blocks=255
	+	erase region 1: offset=0x1fe0000,size=0x8000,blocks=4
	+	RedBoot partition parsing not available
	+	Creating 6 MTD partitions on "86000000.flash":
	+	0x000000000000-0x000000100000 : "fpga"
	+	0x000000100000-0x000000140000 : "boot"
	+	0x000000140000-0x000000160000 : "bootenv"
	+	0x000000160000-0x000000180000 : "config"
	+	0x000000180000-0x000000980000 : "image"
	+	0x000000980000-0x000002000000 : "spare"
	+	TCP cubic registered
	+	NET: Registered protocol family 17
	+	RPC: Registered udp transport module.
	+	RPC: Registered tcp transport module.
	+	Freeing unused kernel memory: 6042k freed
	+	Mounting proc:
	+	Mounting var:
	+	Populating /var:
	+	Running local start scripts.
	+	Mounting devpts:
	+	Mounting /etc/config:
	+	Populating /etc/config:
	+	flatfsd: Created 4 configuration files (167 bytes)
	+	Mounting sysfs:
	+	Setting hostname:
	+	Bringing up network interfaces:
	+	eth0: XLlTemac: Options: 0x3fa
	+	eth0: XLlTemac: allocating interrupt 1 for dma mode tx.
	+	eth0: XLlTemac: allocating interrupt 2 for dma mode rx.
	+	eth0: XLlTemac: speed set to 100Mb/s
	+	eth0: XLlTemac: Send Threshold = 24, Receive Threshold = 4
	+	eth0: XLlTemac: Send Wait bound = 254, Receive Wait bound = 254
	+	udhcpc (v1.14.3) started
	+	Sending discover...
	+	Sending select for 192.168.0.105...
	+	Lease of 192.168.0.105 obtained, lease time 86400
	+	adding dns 192.168.0.1
	+	Starting portmap:
	+
	+	Welcome to
	+	_____ _ _ _
	+	\| ___ \ \| \| \| \| (_)
	+	\| \|_/ / ___ \| \|_ __ _ \| \| _ _ __ _ _ __ __
	+	\| __/ / _ \\| __\| / _` \|\| \| \| \|\| '_ \ \| \| \| \|\ \/ /
	+	\| \| \| __/\| \|_ \| (_\| \|\| \|____\| \|\| \| \| \|\| \|_\| \| > <
	+	\_\| \___\| \__\| \__,_\|\_____/\|_\|\|_\| \|_\| \__,_\|/_/\_\
	+
	+	on ml505-wb
	+
	+
	+	ml505-wb login: root
	+	Password:
	+	~ # ./netmeasure.sh
	+	<code>
	+	192.168.0.101; count=10
	+	Linux ml505-wb 2.6.30-00068-g6177bf8-dirty #74 Thu Oct 22 09:54:26 CEST 2009 microblaze GNU/Linux
	+	CPU-Family: MicroBlaze
	+	FPGA-Arch: virtex5
	+	CPU-Ver: 7.20.c
	+	CPU-MHz: 125.00
	+	BogoMips: 61.31
	+	HW:
	+	Shift: yes
	+	MSR: yes
	+	PCMP: yes
	+	DIV: yes
	+	MMU: 3
	+	MUL: v2
	+	FPU: v1
	+	Exc: ill zero fpu
	+	Icache: 16kB
	+	Dcache: 16kB
	+	write-through
	+	HW-Debug: yes
	+	PVR-USR1: 00
	+	PVR-USR2: 00000000
	+	CPU0
	+	1: 4 level Xilinx INTC xilinx_dma_tx_int
	+	2: 4 level Xilinx INTC xilinx_dma_rx_int
	+	3: 1801 level Xilinx INTC timer
	+	4: 0 level Xilinx INTC eth0
	+	6: 324 level Xilinx INTC serial
	+	total used free shared buffers
	+	Mem: 257300 14488 242812 0 0
	+	Swap: 0 0 0
	+	Total: 257300 14488 242812
	+
	+	\|TCP_STREAM\| 14780 14686 14771 14709 14750 14721 14606 14642 14703 14731\|Average\|14709\|
	+	\|UDP_STREAM\| 24814 24849 24908 24786 24794 24883 24912 24876 24789 24774\|Average\|24838\|
	+	\|TCP_MAERTS\| 7268 7091 7376 7414 6953 7049 7123 7121 6840 6914\|Average\|7114\|
	+	\|TCP_RR\| 281 290 283 290 291 284 290 284 295 289\|Average\|287\|
	+	\|TCP_CRR\| 74 105 74 103 97 103 74 71 105 105\|Average\|91\|
	+	\|UDP_RR\| 14 112 309 100 309 309 308 308 147 309\|Average\|222\|
	+
	+	eth0 Link encap:Ethernet HWaddr 00:0A:35:00:22:01
	+	inet addr:192.168.0.105 Bcast:192.168.0.255 Mask:255.255.255.0
	+	UP BROADCAST RUNNING MTU:1500 Metric:1
	+	RX packets:228411 errors:0 dropped:0 overruns:0 frame:0
	+	TX packets:470059 errors:0 dropped:0 overruns:0 carrier:0
	+	collisions:0 txqueuelen:1000
	+	RX bytes:106473866 (101.5 MiB) TX bytes:518764097 (494.7 MiB)
	+	Interrupt:4
	+
	+	lo Link encap:Local Loopback
	+	inet addr:127.0.0.1 Mask:255.0.0.0
	+	UP LOOPBACK RUNNING MTU:16436 Metric:1
	+	RX packets:0 errors:0 dropped:0 overruns:0 frame:0
	+	TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
	+	collisions:0 txqueuelen:0
	+	RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
	+
	+
	+	</code>
	+
	+
	+	===== Files =====
	+	* link to .config
	+