Xilinx SP605

anonymous@undisclosed.example.com (Anonymous) — Tue, 01 Sep 2020 08:59:14 +0000

2026/05/02 04:32	current
Line 1:	Line 1:
	+	====== Xilinx SP605 ======
	+	* [[uboot:uboot\|How to port U-BOOT]]
	+	* [[fdt:fdt\|How to port Linux]]
	+	* [[prom:prom\|How to load bitstream to PROM]]
	+
	+	===== Manufacturer =====
	+	* [[http://www.xilinx.com/sp605\|Xilinx]]
	+	* http://www.xilinx.com/products/boards/s6embd/reference_designs.htm
	+
	+	===== Manuals =====
	+	<!-- * [[http://www.nuhorizons.com/services/development/Xilinx/ML401ug.pdf\|ML401ug.pdf]] -->
	+
	+
	+	===== Boot log =====
	+	<code>
	+	Linux version 2.6.30-00048-g7755e67 (monstr@monstr.eu) (gcc version 4.1.2) #2 Fri Sep 25 16:06:57 CEST 2009
	+	setup_cpuinfo: initialising
	+	setup_cpuinfo: No PVR support. Using static CPU info from FDT
	+	setup_memory: max_mapnr: 0x8000
	+	setup_memory: min_low_pfn: 0x50000
	+	setup_memory: max_low_pfn: 0x58000
	+	On node 0 totalpages: 32768
	+	free_area_init_node: node 0, pgdat c0246d94, node_mem_map c0830000
	+	Normal zone: 256 pages used for memmap
	+	Normal zone: 0 pages reserved
	+	Normal zone: 32512 pages, LIFO batch:7
	+	Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
	+	Kernel command line: console=ttyS0,115200
	+	NR_IRQS:32
	+	xlnx,xps-intc-1.00.a #0 at 0xfdfff000, num_irq=8, edge=0xffffff00
	+	PID hash table entries: 512 (order: 9, 2048 bytes)
	+	xlnx,xps-timer-1.00.a #0 at 0xfdffe000, irq=6
	+	microblaze_timer_set_mode: shutdown
	+	microblaze_timer_set_mode: periodic
	+	Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
	+	Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
	+	Memory: 121272k/131072k available
	+	Calibrating delay loop... 31.68 BogoMIPS (lpj=63360)
	+	Mount-cache hash table entries: 512
	+	net_namespace: 520 bytes
	+	NET: Registered protocol family 16
	+	XGpio: /plb@0/gpio@81440000: registered
	+	XGpio: /plb@0/gpio@81420000: registered
	+	XGpio: /plb@0/gpio@81400000: registered
	+	microblaze_timer_set_mode: oneshot
	+	Switched to high resolution mode on CPU 0
	+	NET: Registered protocol family 2
	+	IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
	+	TCP established hash table entries: 4096 (order: 3, 32768 bytes)
	+	TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
	+	TCP: Hash tables configured (established 4096 bind 4096)
	+	TCP reno registered
	+	NET: Registered protocol family 1
	+	JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
	+	Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
	+	84000000.serial: ttyS0 at MMIO 0x84001003 (irq = 7) is a 16550A
	+	console [ttyS0] enabled
	+	Device Tree Probing 'ethernet'
	+	xilinx_lltemac 81000000.ethernet: MAC address is now 0: a:35: 0:22: 1
	+	xilinx_lltemac 81000000.ethernet: XLlTemac: using DMA mode.
	+	XLlTemac: Dma base address: phy: 0x84600100, virt: 0xc803c100
	+	XLlTemac: buffer descriptor size: 32768 (0x8000)
	+	XLlTemac: Allocating DMA descriptors with kmalloc<6>XLlTemac: (buffer_descriptor_init) phy: 0x56c50000, virt: 0xc6c50000, size: 0x8000
	+	XTemac: PHY detected at address 7.
	+	eth0 (): not using net_device_ops yet
	+	eth0: Dropping NETIF_F_SG since no checksum feature.
	+	xilinx_lltemac 81000000.ethernet: eth0: Xilinx TEMAC at 0x81000000 mapped to 0xC8036000, irq=2
	+	7c000000.flash: Found 1 x16 devices at 0x0 in 16-bit bank
	+	Intel/Sharp Extended Query Table at 0x010A
	+	Intel/Sharp Extended Query Table at 0x010A
	+	Intel/Sharp Extended Query Table at 0x010A
	+	Intel/Sharp Extended Query Table at 0x010A
	+	Intel/Sharp Extended Query Table at 0x010A
	+	Using buffer write method
	+	Using auto-unlock on power-up/resume
	+	cfi_cmdset_0001: Erase suspend on write enabled
	+	erase region 0: offset=0x0,size=0x20000,blocks=255
	+	erase region 1: offset=0x1fe0000,size=0x8000,blocks=4
	+	RedBoot partition parsing not available
	+	Creating 5 MTD partitions on "7c000000.flash":
	+	0x000000000000-0x000000040000 : "boot"
	+	0x000000040000-0x000000060000 : "bootenv"
	+	0x000000060000-0x000000080000 : "config"
	+	0x000000080000-0x000000880000 : "image"
	+	0x000000880000-0x000002000000 : "spare"
	+	TCP cubic registered
	+	NET: Registered protocol family 17
	+	RPC: Registered udp transport module.
	+	RPC: Registered tcp transport module.
	+	Freeing unused kernel memory: 5952k freed
	+	Mounting proc:
	+	Mounting var:
	+	Populating /var:
	+	Running local start scripts.
	+	Mounting devpts:
	+	Mounting /etc/config:
	+	Populating /etc/config:
	+	flatfsd: Created 4 configuration files (233 bytes)
	+	Mounting sysfs:
	+	Setting hostname:
	+	Bringing up network interfaces:
	+	eth0: XLlTemac: Options: 0x3fa
	+	eth0: XLlTemac: allocating interrupt 0 for dma mode tx.
	+	eth0: XLlTemac: allocating interrupt 1 for dma mode rx.
	+	eth0: XLlTemac: speed set to 100Mb/s
	+	eth0: XLlTemac: Send Threshold = 24, Receive Threshold = 4
	+	eth0: XLlTemac: Send Wait bound = 254, Receive Wait bound = 254
	+	Starting portmap:
	+
	+	Xilinx-SP605-MMU-RTOS-11.3 login: root
	+	Password:
	+	</code>
	+
	+	===== Description =====
	+	* FPGA: XC6SLX45T FGG484-2CES Spartan-6
	+	* Configuration:
	+	* Onboard JTAG configuration circuitry
	+	* 128MB Platform Flash XL
	+	* Quad SPI Flash 64MB
	+	* 16MB Parallel (BPI) Flash
	+	* System ACE 2G Compact FLASH (CF) Card
	+	* JTAG
	+	* Memory:
	+	* DDR3 Component Memory 1Gb
	+	* 16MB Parallel (BPI) Flash (Also available for configuration)
	+	* IIC 8Kb IIC EEPROM
	+	* Communications and Networking
	+	* 10/100/1000 Tri-Speed Ethernet
	+	* SFP transceiver connector
	+	* GTX port (TX, RX) with four SMA connectors
	+	* USB To UART Bridge
	+	* PCI Express x1 Edge Connector
	+	* Expansion Connectors:
	+	* FMC-LPC connector (1 GTP Transceiver, 68 single-ended or 34 differential user defined signals)
	+	* User GPIO with two SMA connectors
	+	* 4 User I/O (Digilent 2x6 Header)
	+	* Clocking:
	+	* 200 MHz Oscillator (Differential)
	+	* Oscillator socket (Single-Ended)
	+	* SMA Connectors for external clock (Differential)
	+	* GTX Reference Clock port with 2 SMA connectors
	+	* Display:
	+	* Video - DVI / VGA
	+	* 16x2 LCD character display
	+	* 4X LEDs
	+	* Control:
	+	* 2X Push Buttons
	+	* 4X DIP Switches
	+	* Power 12V wall adapter or ATX
	+	* Voltage and Current measurement capability of 2.5V, 1.5V, and 1.2V, 1.0V supplies
	+
	+	===== Board pictures =====
	+	{{:boards:sp605:sp605.jpg?1000\|}}

Microblaze Linux/Qemu/U-Boot wiki - boards:sp605

Xilinx SP605