Xilinx ML505

anonymous@undisclosed.example.com (Anonymous) — Tue, 01 Sep 2020 08:59:14 +0000

2026/05/02 09:03	current
Line 1:	Line 1:
	+	====== Xilinx ML505 ======
	+	* [[uboot:uboot\|How to port U-BOOT]]
	+	* [[fdt:fdt\|How to port Linux]]
	+	* [[prom:prom\|How to load bitstream to PROM]]
	+
	+	===== Manufacturer =====
	+	* [[http://www.xilinx.com/ml505\|Xilinx]]
	+	* [[http://www.xilinx.com/products/boards/ml505/reference_designs.htm\|Xilinx Reference design]]
	+	* [[http://www.xilinx.com/products/boards/ml505/bsb.htm\|BSB + additional sw]]
	+	* [[http://www.xilinx.com/products/boards/ml505/standalone_apps.htm\|Standalone apps]]
	+
	+	===== Manuals =====
	+	* [[http://www.xilinx.com/support/documentation/boards_and_kits/ug349.pdf\|ug349.pdf]]
	+
	+	===== Personal experience =====
	+	==== Blinking INIT LED ====
	+	* Yes, I have some but the worst one is that INIT LED is blinking and you don't know why.
	+	* Solution is easy. If you have this trouble send me email, I'll test where the problem is.
	+
	+	===== Description =====
	+	* XC5VLX50TFFG1136
	+	* DDR2 SODIMM (256 MB)
	+	* ZBT SRAM (1 MB)
	+	* Linear Flash (32 MB)
	+	* System ACE™ CF technology (Compact Flash) - Not every CF works with ACE correctly
	+	* Platform Flash - Use only one flash for storing bitstream
	+	* SPI Flash
	+	* JTAG Programming Interface - You have to use programming cable
	+	* External Clocking (2 Differential Pairs)
	+	* USB (2) – Host and Peripheral
	+	* PS/2 (2) – Keyboard, Mouse
	+	* RJ-45 – 10/100/1000 Networking
	+	* RS-232 (Male) – Serial port - Second serial port is on the board
	+	* Audio In (2) – Line, Microphone
	+	* Audio Out (2) – Line, Amp, SPDIF, Piezo Speaker
	+	* Rotary Encoder
	+	* Video Input
	+	* Video (DVI/VGA) Output
	+	* Single-Ended and Differential I/O Expansion
	+	* GPIO DIP Switch (8), LEDs (8), and Pushbuttons (5)
	+	* MII, GMII, RGMII, and SGMII Ethernet PHY Interfaces
	+	* PCI Express® Edge Connector (x1 Endpoint)
	+	* GTP: SFP (1000Base-X)
	+	* GTP: SMA (RX and TX Differential Pairs)
	+	* GTP: SGMII
	+	* GTP: PCIe™
	+	* GTP: SATA (Dual Host Connections)
	+	* GTP Clock Synthesis Chips
	+	* Header for 2nd Serial Port
	+	* 2nd Platform Flash PROM (32 Mb) for large device
	+	* Mictor Trace Port
	+	* BDM Debug Port
	+	* Soft Touch Port
	+
	+
	+
	+
	+
	+
	+
	+	===== Board pictures =====
	+	{{:boards:ml505:ml505-top.jpg\|Front}}
	+
	+
	+
	+	===== Impact =====
	+	SW3 is set to all off
	+
	+	{{:boards:ml505:ml505-impact.jpg\|Impact}}
	+

Microblaze Linux/Qemu/U-Boot wiki - boards:ml505

Xilinx ML505