Microblaze wiki page

## Transferring control to Linux (at address 44000000), fdt addr 0x45100000, initrd 0x45c00040...
Found FDT at 0x45100000
 -> early_init_devtree(45100000)
search "chosen", depth: 0, uname:
search "chosen", depth: 1, uname: memory@44000000
search "chosen", depth: 1, uname: chosen
Command line is: root=mtdblock0
dt_root_size_cells = 1
dt_root_addr_cells = 1
memory scan node memory@44000000, reg size 8, data: 44000000 2000000 2 1,
 - 44000000 ,  2000000
Phys. mem: 2000000
Scanning CPUs ...
boot cpu: logical 0 physical 0
 <- early_init_devtree()
Linux version 2.6.24-rc4 (microblaze@monstr.eu) (gcc version 3.4.1 ( PetaLinux 0.20 Build -rc1 050607 )) #4 Mon Dec 10 10:52:26 CET 2007
 -> unflatten_device_tree()
  size is 1344, allocating...
  unflattening 45ffecb8...
fixed up name for  ->
fixed up name for memory@44000000 -> memory
fixed up name for chosen -> chosen
fixed up name for cpus -> cpus
fixed up name for microblaze,5.00.c@0 -> microblaze,5.00.c
fixed up name for opb_v20 -> opb_v20
fixed up name for opb-gpio@40000000 -> opb-gpio
fixed up name for opb-gpio@40020000 -> opb-gpio
fixed up name for ethernet@40c00000 -> ethernet
fixed up name for opb-gpio@40040000 -> opb-gpio
fixed up name for serial@40600000 -> serial
fixed up name for opb-gpio@40060000 -> opb-gpio
fixed up name for opb-btn-decoder@70400000 -> opb-btn-decoder
fixed up name for opb-mdm@41400000 -> opb-mdm
fixed up name for interrupt-controller@41200000 -> interrupt-controller
fixed up name for opb-timer@41c00000 -> opb-timer
 <- unflatten_device_tree()
setup_cpuinfo: initialising
setup_cpuinfo: Using full CPU PVR support
setup_memory: max_mapnr: 0x46000
setup_memory: min_low_pfn: 0x44000
setup_memory: max_low_pfn: 0x2000
reserved 1 - 0x44000000-0x0031d400
reserved 2 - 0x45ffecb8-0x00001348
hm, page 01fff000 reserved twice.
On node 0 totalpages: 8192
  Normal zone: 64 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 8128 pages, LIFO batch:0
  Movable zone: 0 pages used for memmap
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
Kernel command line: root=mtdblock0
OPB INTC #0 at 0x41200000, handle 0x10
PID hash table entries: 128 (order: 7, 512 bytes)
OPB TIMER #0 at 0x41c00000, irq=0
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Memory: 29288k/32772k available
Calibrating delay loop... 32.76 BogoMIPS (lpj=163840)
Mount-cache hash table entries: 512
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
uartlite.0: ttyS0 at MMIO 0x40600000 (irq = 2) is a uartlite
console [ttyS0] enabled
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
uclinux[mtd]: RAM probe address=0x4414a5c0 size=0x1d2000
Creating 1 MTD partitions on "RAM":
0x00000000-0x001d2000 : "ROMfs"
uclinux[mtd]: set ROMfs to be root filesystem index=0
VFS: Mounted root (romfs filesystem) readonly.
Freeing unused kernel memory: 80k freed
Mounting proc:
Mounting var:
Populating /var:
Running local start scripts.
Mounting /etc/config:
Populating /etc/config:
flatfsd: Nonexistent or bad flatfs (-48), creating new one...
flatfsd: Failed to write flatfs (-48): No such device
flatfsd: Created 5 configuration files (185 bytes)
Mounting sysfs:
Setting hostname:
Setting up interface lo:
No usable address families found.
socket: Function not implemented
Setting up interface eth0:
No usable address families found.
socket: Function not implemented
Starting portmap:
Starting thttpd:

uclinux login: