Table of Contents

Logo

mONeCos - eCos distribution for Microblaze CPU

Hi developers,

It is pleasure for me to introduce first working eCos distribution called mONeCos for Microblaze CPU. I would like to say big thanks to Tomas Brabec, Michal Pfeifer and Czech Technical University, Faculty of Electrical Engineering, Department of Computer Science and Engineering for help with doing first distribution based on eCos.

Michal Simek acknowledges PetaLogix for lending the reference board and Xilinx for providing design tool and the reference board.

I wish you many good experiences with mONeCos.

Best regards,

Michal Simek

History

The eCos kernel for Microblaze CPU was developed at CTU by Michal Pfeifer1) (Tomas Brabec (supervisor) and me (Michal Simek) as opponent for this diploma work). This kernel is based on PowerPC405.

State before my changes

What my changes are

These facts helped with creating new eCos distribution which is optimized for Xilinx Microblaze CPU called mONeCos distribution.

mONeCos distribution is maintained by Michal Simek and hosted only at http://www.monstr.eu. Please send feedback on using this distribution back to me.

License

This distribution contains files, which are written under restricted license, owned by Michal Simek. Private license is placed on the top of these files. You are not allowed to change and distribute these files without permission from Michal Simek. You can use these files without any restriction.

Disclaimer

This distribution is only a release for testing purposes and should not be used for life support, aerospace or other life- or mission-critical applications. Michal Simek does not respond for any claims caused by using mONeCos distribution.

Overview

mONeCos distribution is divided into three categories. First is focused on hardware (hw folder), second on software (sw folder) and third on tools.

Hardware

Hardware folder contains three sub-folders. Design folder contains reference designs used in eCos templates. Inside the pre-build folder, there is a bitstream, redboot and eCos elf file with testing application for reference designs. The folder user-design is prepared for custom designs. The folder edk_user_repository stores a BSP, which helps you setting the eCos kernel. Usage of BSP is described in special paragraf.

Software

Software folder contains three folders. Namely ecos-2.0 containg eCos kernel, project containing projects for prepared reference boards, and user-projects prepared for your custom applications.

Tools

This folder contains a toolchain for Microblaze CPU, some helping scripts, and a packed source code for configtool.

Documentation

The following documentation covers work with mONeCos distribution

Download

VersionSizeMD5SUMSHA1SUMDescription
monecos-pre-1.tar.gz80MB91d5ac374f57b1f34d50d9e76c0b90f57b6b08a0924487f1c729891a23bae31158dc78c4Full distribution
ecos_v2_00_a.tar.gz6kafa50ff9656cc59b315aef9ee876ba2a09df604f4e747b419ff564bfcbfe66c2f93f917bUpdated BSP for ecos port by Li Zheng

External documentation

1)
The diploma thesis is available in czech here.